This article may contain affiliate links. When you purchase through links on our site, we may earn an affiliate commission.
Top 10 Rated garage door receiver in 2021 Comparison Table
- ALLEVIATES FREQUENCY INTERFERENCE: The Genie GIRUD-1T is designed to alleviate frequency interference issues from implemented Land Mobile Radio Communication systems that cause shortened opener range.
- AUTOMATICALLY SEEKS CORRECT FREQUENCY: The Universal Dual Frequency Kit auto seeks the 315 or 390 Mhz so your opener responds regardless of nearby interference.
- UPGRADES OLD GARAGE DOOR OPENERS: Upgrades or adds Intellicode security to older openers.
- INCLUDES NEEDED ACCESSORIES: Kit comes with receiver box, transformer, wireless remote transmitter, wire and clips, mounting screws and instructions.
- COMPATIBLE WITH MOST MAJOR BRANDS: Don’t have a Genie garage door opener? No problem. The GIRUD is universal.
- Compatible with 811LM, 813LM, and all MAX remote controls
- Expands to three channels: Channel 1 - 50 remotes, Channel 2 - 20 remotes, Channel 3 - 20 remotes
- Compact design fits most gate and commercial door operators
- Provides convenient access to gated communities, industrial facilities, and commercial sites all with a single transmitter solution
- Multiple remote control options available to provide secure access from the safety and convenience of a vehicle
- 115 Volt Plug-In Universal Radio Control Only 315MHz frequecny purple learn button
- Replaces older or discontinued model remotes and receivers.
- Wire and instructions included. Simple to install
- Uses 371LM Remote Control Transmitter Not Included.
- SECURE # Rolling code key fob device offers better security and far more code combinations (more than 18 quintillion - 18 x 10^18 possibilities, nearly a trillion more than typical fixed code or so-called learning code ones) and built on new platform using higher RF sensitivity -113dBm superheterodyne module for better long range and more stable performance.
- EASY & FLEXIBLE # Two independent relay channels can either work together (in latching) for polarity reversing or individually (in pulse / hold) to control different electronics, such as one channel for garage door controller unit, the other for entry lights. Easy programming & easy to use DIP switches working mode selection between pulse / momentary, hold / toggle and latching mode.
- ENCLOSURE # Designed to work both indoor and outdoor, default enclosure supplied protects the inner radio receiver circuit board safe from rain or other tough weather, while customer can also use chemical glue or epoxy adhesive to seal the wiring holes after setup, providing IP55 equivalent waterproof protection level. Mounting holes are provided for easy installation to walls etc using screws.
- INTERFACE # 3-Level efficient switching power supply system. Our 202U receiver board accepts 12 volts - 24 volts AC or DC wide supply voltage range (min. current rating is [email protected] DC). Each relay can switch up to 10A @14V DC or 10A @125V AC for resistive load (6A @14VDC for inductive load). Built-in small DC motor / solenoid polarity reversing control capability by using interlock latching mode and both relays.
- APPLICATIONS # Used in anti-theft alarm control panels, home automation systems, short and long range turn devices on / off wirelessly, lifts, boats, marine, winches, motor-driven curtain, roller blinds, overhead garage door & gate barriers, motorcycles, vehicles, cars, truck, industrial and agricultural electrical control such as water pumps & sprayer, electric door release locks, windows, manual switches extender, LED lighting lamp bulbs and strips, entrance and access control etc.
- The receiver can be powered with either 24V AC/DC or with 12V DC. The jumper must be in the 24V position for use with 24V, and in 12V position for use with 12V DC. The jumper must be set to the proper voltage to avoid damage to the receiver.
- The 412HM Universal Receiver can be used with up to 15 rolling code transmitters or passwords in HIGH security mode. Alternately, it can be used with up to 31 of any type LiftMaster/Chamberlain (390Mhz) transmitter in NORMAL security mode, including any combination of rolling code, billion code, or dip switch remote. Includes receiver, antenna wire and instructions.
- 390MHz Frequency.
- Does not include optional 24 volt power supply 85LM.
- Accessory Transmitters - Series 50, 60, 80 and 900.
- 115 Volt Plug-In 390MHz Universal Radio Control Receiver
- Compatible with RED / ORANGE Rolling Code, Security Plus Operators
- Wiring and instructions included
- Compatible with Liftmaster 971LM, 972LM, 973LM and 970LM (900 Series) remotes.
- Can be used / added to any Garage Door Operator
- RF technology - long remote control distance
- Stable signal - The remote relay module provides high signal sensitivity
- Item included - 5pcs transmitter and 1pc RF receiver
- Working Mode - momentary, toggle, latching (default toggle mode)
- Ideal for garage door ,light, motor, wireless security alarm, wireless door alarm, wireless light switch, etc
- Includes receiver and one DTC transmitter
- 24 Volts, 3-wire upgrade kit
- Compatible with all Linear Moore-O-Matic Delta 3 products
- 310 MHz frequency, 8 dip switches for gate or garage door openers
- Batteries and visor clips included
- DOES NOT REPLACE THE 41A5021-1H-315 / 41A5021-3H-315 / 41A5021-1M-315
Our Best Choice: eMylo DC 12V 2CH RF Relay Smart Wireless Remote Control Light Switch Garage Door Remote Opener 433Mhz Transmitter with Relay Receiver
Input Voltage: DC 12V
Operating Frequency: 433Mhz
Coding Way: Intelligent Learning
Output Type: Passive Output
Max load: 10A
Factory Default: Self-locking
Board DIM: 69x49x17mm
Case DIM: 75x65x29mm
Operating Voltage: DC12V
Operating Frequency: 433Mhz
Chip Type: EV1527
Modulation: ASK (Stable, less interference)
Battery Type: 12V 27A
Product DIM: 54x30x13mm
You will get:
2X Transmitters (Battery is not included)
1X Receiver, 1X English Manual
RF Remote Control
eMylo Wireless RF Relay Switch allows you to power on or off your home appliances by remote control. It can avoid energy waste and save your money.
Dual Channel Design
Control Light on/off Easily, Dual Channel Design can control two lights at the same time, which is more convenient and intelligent.
Remote control distance
No direction through the wall remote control distance about 100 feet. It can pass through walls, floors and doors, control receiver from any place within a reliable distance.
It can be used in industrial control and security fields, such as light, motor, remote controller, wireless security alarm, wireless door alarm, wireless controller, etc.
Remote control distance
REMOTE CONTROL–EASY to SETUP and USE. Stable and reliable performance, high receive sensitivity
EXCELLENT STABILLITY–The RF relay module provides high signal sensitivity at lower cost and resist interference
STRONG SIGNAL–wireless relay remote can pass through walls, floors and doors, control receiver from any place within a reliable distance
MORE FLEXIBILITY–It adopts non-directional wireless encoding technology, allowing independent control without mutual interference, can be flexibly configured in quantity and in operating modes
WIDELY APPLICATION–Be used in industrial control and security fields, such as light, motor, remote controller, wireless security alarm, wireless door alarm, wireless controller, etc