This article may contain affiliate links. When you purchase through links on our site, we may earn an affiliate commission.
The Safety 1st Grow and Go 3-in-1 is designed to do exactly that: grow with your child while you are on the go.
This seat has three different stages, adjusting as your child grows up. In addition, this seat is made with the highest safety standards, as Safety 1st always tries to live up to its name.
In the sections below, we will discuss the design of this car seat, the safety features, other key features, and finally any problems or concerns that parents have had with the car seat.
Grow And Go Design
This car seat is designed to grow with your child, and so it can be used in three different stages.
There are two “grow-with-baby” pillows included. These pillows provide extra cushioning and support. They are easily removable when your child outgrows them and needs more room.
The “grow-with-baby” pillows should be used until the child is around six to nine months. This will ensure a better harness fit and a safer ride.
In the booster seat position, the high back and shoulder belt positioner helps you adjust the seatbelt to the safest and most comfortable position for the child.
While these three positions are common for any convertible car seat, this car seat is rated as one of the best. For a list of top convertible car seats, including this one, click this link here.
The measurements for the seat are as follows:
- The height of the shell with the headrest is twenty-six inches
- The newborn rethreaded harness position is six inches with insert
- The no-rethread harness height is between ten and seventeen inches
- The highest booster belt guide position is eighteen and a half inches
- The seat depth is twelve and a half inches
The weight of the seat is just below fifteen and a half pounds. This makes it on the lighter side of convertible car seats, some of which can be up to twenty-three pounds.
Safety 1st has always put the safety of children first, becoming more involved in charitable organizations such as the March of Dimes. They were also a sponsor of Safe Kids Day, highlighting the work of Safe Kids Worldwide and promoting a valuable message about preventable injuries.
As part of Safety 1st’s mission, this seat has numerous safety features to keep your child safe and secure. They are the biggest manufacturer of child restraints. Their extensive testing ensures that they always exceed federal safety standards.
The Insurance Institute for Highway Safety has given this seat a Good Bet rating in booster seat mode. Overall, this seat exceeds most Federal Safety Standards.
This car seat also received four out of five stars for its ease of use rating from the National Highway Traffic Safety Administration in the forward-facing position. It scored particularly high in the categories of securing the child and evaluation of the instructions.
This car seat is designed to keep a child in the rear-facing position for longer than some other convertible car seats. The American Academy of Pediatrics recommends children ride rear-facing until at least 2 years of age. If you want to keep your child in the rear facing position for as long as possible, check out the other version of this same car seat discussed at the end of this article.
Crash data has proven that rear facing seats have a much lower rate of head and neck injuries. Even if your child’s legs are getting a bit long for the rear-facing position, it is safer to keep them in this position.
The “grow-with-baby” pillows make for a better, safer fit for smaller babies.
Other Key Features
The car seat pad can be taken off the seat without having to remove the harness. It is machine washable and dryer safe.
There is quite a bit of padding in this car seat, so your child should be totally comfortable. Hopefully they will be comfortable enough to quietly go to sleep or watch a movie. To let your child watch a DVD, check out this list of flip down car DVD players and monitors .
There are two integrated cup holders. These will keep your child’s snacks, drinks, and small toys within easy reach.
On either side of the seat, there are harness holders. These can be used in both the rear-facing and the forward-facing positions.
These harness holders will hold the harness in an open position. This will make it easier to get your child in and out of the seat. You will not have to go looking for the harness each time you go to buckle in your child because it will always be in the same place.
The QuickFit Harness also allows you to adjust the height of the headrest and the harness in one step. This way, you can always give your child the best fit, despite any recent growth spurts.
The harness is also designed to be no-rethread. This means that you do not have to manually thread the harness through the slots. There is a five-position harness, with a separate newborn position.
Unfortunately, the newborn position does have to be rethreaded. This means you will have to manually thread the harness through the slots. Inexperienced parents often have trouble with this and should get help their first couple of times.
This seat is designed to take up less space. In rear facing mode, it is smaller than many other car seats. This means that a passenger in the front seat of the car can have up to seven inches more leg room than they would with other car seats behind them. You can also use this extra room to give the child more leg room, which they would probably appreciate, especially as they start outgrowing the seat.
There are three recline angles on this seat. The side of the seat has a numbered guide so that it is easy to adjust. This lessens the need for a pool noodle or towel for leveling.
When your child is a newborn or small baby, you must use recline position one for the proper head support. For older babies in the rear-facing position, you can use recline positions two or three. In forward-facing and booster mode, it is recommended that you usually use position one.
There is also a level line to guide positioning.
This seat can be used with lower anchors or a seat belt in the rear-facing position.
This product has a ten-year lifespan before it expires. It is also more affordable than many other convertible car seats.
This car seat comes in nine different colors and styles.
Problems And Concerns
A simple problem is that the cup holders are not removable. This makes them more difficult to clean.
Especially with older children, even adjusting the headrest doesn’t allow the child to properly see out of the window. This is a problem that will be more annoying for a child than for a parent, but an unhappy child can make a long drive difficult.
While the manufacturer does state that this seat can hold babies as small as five pounds, the seat would likely be too be big for babies of that size.
This is a common problem with convertible car seats. If you have a preemie or a small newborn, it is generally probably safer to start with an infant car seat. You can always move on to a convertible seat once your baby has grown more.
Some parents have complained that they had problems tightening the straps in the rethreaded infant position. This caused the car seat to flop around.
The splitter plate can sometimes get stuck on some plastic ribs between the seating area and the base. This could be why it is so hard to tighten the harnesses sometimes. This may or may not have been addressed by the company. You can call the company to find out about product recalls or returns if you have this problem.
In general, inexperienced parents have had trouble threading the harness for the infant position. It is recommended that new parents who have never done this receive help their first few times. Otherwise, there is a higher chance of incorrect installation and danger to the child.
Because so many parents have trouble with the infant harness, you may want to consider starting with an infant car seat. You can then transfer your child to the Safety 1st Grow and Go 3-in-1 when the child is older and big enough to not require the infant harness.
Other parents complained that they could not get a proper recline angle in the seat. This caused the child’s head to not be supported enough while sleeping.
Both of these issues could be due to the car seat design not being compatible with certain cars. Before you buy, you should do some research or call the company to make sure that your vehicle is compatible with this car seat.
A handful of parents also complained that the chest clip was too wide. It made the child uncomfortable and even sometimes left marks on the skin.
One parent in Arizona claimed that while the car seat was in a hot car (empty), the chest clip melted due to the temperature.
Make sure to check the car seat if your car has been sitting out in the sun. To keep your car from getting too hot, check out this list of the windshield sun shades.
There is another version of this same car seat with extra features called the Safety 1st Grow and Go EX Air 3-in-1. This model has all of the features of the original car seat, listed above, along with a few more.
The Grow and Go EX Air allows you to keep your child in the rear-facing position much longer. The weight limit on the rear-facing position on this model is fifty pounds.
There is also an extra seat cushion in this model and the cushions are reversible.