This article may contain affiliate links. When you purchase through links on our site, we may earn an affiliate commission.
Has it been a while since you last did a radiator flush? This is an essential vehicle maintenance task that many people overlook. When it is working correctly, the radiator keeps your engine cool while you are driving.
However, when the radiator stops working properly, your engine is likely to overheat. This can lead to a range of severe and rather expensive issues. So. find out about a radiator flush price and how to perform this task…
- What is a Radiator Flush?
- The Benefits of a Radiator Flush
- When you Should Have the Radiator Flushed
- How to Perform a Radiator Flush
- Types of Radiator Flushes
- Radiator Flush Pricing
- How to Save Money on a Radiator Flush
- Best Way to Keep Radiator Flush Price Down
- Radiator Flush Price – Final Thoughts
What is a Radiator Flush?
Over time, deposits tend to start building up in the radiator system of your car. This causes blockages, making the coolant circulation less efficient. As a result, the engine gradually becomes hotter and serious engine damage can occur.
Regularly flushing the radiator helps to prevent this problem and is a relatively quick and easy task. The old coolant has to be drained from the radiator and replaced with a mixture of coolant, water, and detergent. The next mixture circulates through the engine’s cooling system, removing the buildup in your radiator channels.
The mixture is then drained from the engine and replaced by a mix of coolant and water. The procedure will generally take a couple of hours and is offered by most mechanics as part of a service. However, it is also reasonably simple to perform a radiator flush yourself.
The Benefits of a Radiator Flush
Having your radiator flushed on a regular basis helps to make sure that your car performs perfectly. There are several specific benefits of a radiator flush, so let’s take a closer look…
Removing Scale and Rust Deposits
Scale and rust deposits will build up in the radiator over time. A radiator flush helps to push these deposits out of the system. This reduces the risk of overheating the engine or damaging the radiator.
Water Pump Lubrication
The new coolant you use during the flush contains special additives that lubricate the car’s water pump. This helps prolong the lifespan of the water pump and saves you money in the long run.
During a radiator flush, the contaminants in the radiator will be removed. This helps to ensure that the inside of the radiator is as clean as possible.
Identifies Cooling System Issues
When performing a radiator flush, most mechanics will inspect the entire cooling system for leaks and other problems. Catching issues early can save you a lot of time, trouble, and money. This prevents future damage and helps to ensure that your vehicle performs at its optimum level.
When you Should Have the Radiator Flushed
Generally speaking, it’s a good idea to flush the radiator once a year. As mentioned, flushing your radiator is often performed as part of your annual servicing, along with changing the oil. However, you should also take the recommendation of the manufacturer and your annual mileage into account.
Let me explain…
The quality of antifreeze you use and your driving environment also affect how often you need to flush the radiator. The standard rule of thumb is to flush your radiator every 40,000 miles. However, if you do not drive very far or often, the once-a-year rule is probably the best guide.
How to Perform a Radiator Flush
Before performing a radiator flush yourself, you need to wait until your engine has cooled completely. The coolant in a warm engine can be scorching. Flushing the radiator when the coolant is hot can cause a severe injury.
Next, you need to jack up the front of your car slightly to make accessing the underside of the radiator easier. This also helps to eliminate bubbles from the coolant when the flush takes place.
It is advisable to brush the fins of the radiator to remove any loose buildup of grime and dirt. Carefully inspect the radiator for signs of rust and other types of damage. If found, this can indicate that there are more serious issues with the heating system.
You then need to inspect the two hoses that enter the radiator to make sure they are not collapsed. A collapsed radiator hose can cause problems with the way that the coolant flows through the system.
Make sure that you place a drainage pan underneath the radiator’s drainage valve. You need to identify the petcock, which is usually attached to the bottom of one of the radiator tanks. There is usually just one bolt attached to the bottom of the tank.
Once you remove the petcock, the radiator will start to drain. During this step, around half the coolant that is in the system will be drained.
Next, you need to run the coolant, detergent, and water mixture through the cooling system. Run your car for around fifteen minutes to allow the mixture to circulate fully. Allow this mixture to cool down completely. Then drain it from your vehicle, repeating two or three times if necessary.
The most important part comes next…
You then need to add the new coolant to the engine at a mix of half coolant and half distilled water. Make sure you mix these elements before adding them to the engine and bleed the radiator to remove air pockets. Run the engine for ten minutes with the radiator cap off and then top up the coolant to the fill line.
Types of Radiator Flushes
It’s worth noting that several different types of radiator flushes exist. Each of these comes with pros and cons that should be taken into account. This will help you to track down the perfect product for your needs.
This is the most common type of radiator flush and is the easiest to work with. Some types of liquid flush are concentrated, while others are ready to use straight away. The active ingredient is usually sodium citrate, while moderate corrosives and catalysts can also be added to the mix.
The advantage of powder solutions is that you can control the dilution according to your needs. While this requires a little more work and precision, it is ideal if your system is especially clogged and grimy. However, be aware that while powder solutions strip away rust and grease very well, they are also very harsh on the skin and eyes.
Pressure-based radiator flushes use the force of water and air pressure to eliminate dirt and debris. They are gentle on hardware and will not burn the skin or harm the eyes. Pressure-based radiator flushes often come with hose attachment wands that scrape away debris from the inside of your radiator.
Radiator Flush Pricing
The main cost of the radiator flush is the product that you choose. The typical pricing for a high-quality product is between $20 and $40. Depending on where you go, a professional mechanic is likely to charge you between $50 and $100 for the task.
How to Save Money on a Radiator Flush
If you are comfortable working on your car, you can easily perform the radiator flush yourself. However, it is essential to choose a high-quality product that will clean and protect your radiator. Here are some of the best radiator flush products available to purchase right now.
Prestone AS105 Radiator Flush and Cleaner – Easiest Radiator Flush
This product comes in a 22-ounce container and can be poured directly into your radiator without being watered down. The radiator flush uses chelation to remove rust and other types of corrosion. It is backed by natural fluid pressure and flushes out debris to leave your radiator perfectly clean and functional.
PrimoChill Radiator Cleaning Treatment – Best Radiator Flush Concentrate
This radiator flush is a concentrate, which allows you to adjust the strength according to your needs. It visibly removes rust and other types of corrosion quickly and completely. It is suitable for all kinds of vehicle radiators and helps to keep the engine temperature stable for enhanced performance.
Radiator Genie Cleaning System – Best Eco-Friendly Radiator Flush
If you are searching for an environmentally-friendly radiator cleaning solution, this product is for you. This radiator cleaning system uses directed airflow and water pressure to keep your radiator running smoothly. The product comes with two user-friendly cleaning wands that are set with long tubes and ergonomic grips.
Best Way to Keep Radiator Flush Price Down
You can do a lot to avoid debris buildup and deterioration of your radiator and take better care of the entire engine. If your car has a turbo engine, please read my Best Blow Off Valves Reviews. Then check out these Best Engine Degreasers, my Best Engine Flush Reviews, the Best Fuel Injector Cleaners, the Best Catalytic Converter Cleaners, and the Best Octane Booster for your engine.
These Rust Prevention Products, the Best Rust Converters, and these Best Rustproofing Paints are well worth checking out for corrosion prevention and cure. I also recommend these Best Battery Desulfators to use when you see any corrosion developing around the terminals.
You might also enjoy my Best Oil Additives Reviews or reviews of the Best Oil Additives for Older Engines, the Best Oil Additives to Stop Leaks, and the Best Oil Additives for Noisy Lifters you can buy in 2022?
Back to today’s topic…
Radiator Flush Price – Final Thoughts
If you are experiencing rapid overheating or picking up strange odors from under the hood, it is best to flush your radiator. Not only will these issues persist if you do not perform the flush, but they are also likely to get worse over time. Therefore, this could end up costing you a lot more money and time, in the long run, if left unattended.
Moreover, if a radiator flush is not performed regularly, corrosion, sediment, and other unwanted elements will build up in your coolant system. This is likely to lead to damage to the gaskets or other components, resulting in leaks, overheating, and other issues. Therefore, it is best to perform a radiator flush as part of your regular maintenance.
Enjoy your vehicle and your rides!