Pittsburgh Automotive Floor Jack Review

Howdy people. Today we’re going to give you an in-depth look at and review of the Pittsburgh automotive floor jack.

If you are in the auto trade, maybe you are the owner of a sports car, a racer, lowrider or a specially lowered custom vehicle, then you are going to be well aware that regular style floor jacks will not slide under to lift up these kinds of car or truck bodies.

Pittsburgh Automotive Floor Jack
Our rating:4.5 out of 5 stars (4.5 / 5)

Low-Profile Jacks…

When you are seeking a jack to lift a lower than usual vehicle, then you are really going to need for the job what is known as a ‘low profile jack.’ Very much made to the same design as regular trolley jacks with a steel chassis frame the lifting arm is fitted inside of this.

At the rear, you have the hydraulics and attachment for the pump bar to slot into.

Pittsburgh Automotive Floor Jack

The one main different feature is the lifting arm. This is positioned much lower than on your normal style of jack. So, you can slide it under much lower set vehicles than standard models.

Therefore, if you are working on lower stanced cars, then it is important for you to find a floor jack that will not only fit under the car but is strong and sturdy enough to lift it safely and easily.

Usability and Durability

These are very important factors when selecting which jack will be suitable for you. It needs to stand the test of time, as well as be easy to position and use. We recommend you don’t end up sacrificing quality for the sakes of a few dollars. Go for the best you can afford.

With that in mind, let us now take a look at the…

Pittsburgh Low Profile Automotive three-ton Heavy Duty Floor Jack

With its rapid pump technology, you are looking at one of the most dependable and best quality jacks on the market today. This is a very durable, well equipped, fast raising jack with some great added safety features.

Pittsburgh

That makes it, we feel, suitable for both professional workshops and home garages.

So, let’s now look a bit closer at what this jack can actually do, and it’s manufacturers specifications…

How Low Do You Go…

This is a low profile jack, so of course, the first thing we should point out is how low down it really can get. Well, it really can get down in the weeds. This jack will lower to a very impressive 2 ⅞ of an inch.

Yes, that’s correct, at a touch under three inches the Pittsburgh Automotive Floor Jack will slide under pretty much the lowest slung, road-hugging vehicles you could possibly come across. The Pittsburgh jack’s lifting range is from 2 ⅞ up to a wapping height of 19 ¾ inches.

So, not only can it get down incredibly low but also boasts a real high lift capacity too, making for an extremely versatile jack that can cater to low and elevated vehicles alike.

Therefore, we have deduced it is a super low lifting jack.

Automotive Floor Jack

Now We Ask, How Strong Is It?

Three tons is the maximum lift capacity, or 6000 lbs. Well capable enough for all your lifting needs.


Construction

This is a large jack constructed from premium quality steel. The length is 28 inches, thus allowing for a good reach far under your vehicle bodywork. It is 12 inches wide that will benefit stability.

At the rear where the internal hydraulics are in place, the full height is still ultra-low at just 10 inches. The high standards of build and materials do mean however that this is a heavyweight jack. This ‘big boy’ weighs in at 71 ¾ lbs.

A sacrifice we actually feel is justified to make. It is much heavier than aluminum jacks out there, but for the extra durability and length of life you will receive, it surely makes sense.

Features

Here is a feature we like the most on the Pittsburgh Automotive Floor Jack. The saddle pad is of a nice wide diameter at four and ¼ inches. There is the added bonus in that it rotates a full 360 degrees.

Many jacks have small saddle pads that mean you often have to perch the lifting vehicle precariously onto it, and the weight force contact is not spread out so wide. With a larger size pad like this, you will get more support and spread the weight.

The fact it can rotate will also help with precision positioning of the jack angle when preparing to take the full weight of your vehicle too. Many jacks have fixed saddle pods meaning you have to lower and raise, lower and raise while adjusting the jack’s position.

This can be a real grind, especially when space is tight. One point to make, however, is that the saddle has no protective covering for your under bodywork. The painted metal could do with some kind of padding, we feel, that can prevent scrapes to the underside of your vehicle.

Pittsburgh Automotive

Hydraulics

The Pittsburgh makes use of highly efficient and super tough hydraulics, allowing you to easily lift your vehicle quickly and confidently. Thanks to its dual-parallel pump system this is one speedy jack.

Built to incorporate rapid pump technology, you are able to reach the maximum lift height in a very impressive three and a half pumps of the jackbar. A very good feature indeed, and the pump action is also super smooth and easy to manage.

A universal joint release system is also in play, giving you full control of lowering speeds. You can activate and stop the lowering process by simply twisting the jackbar. The Pittsburgh Automotive will bring your motor back down to earth as smooth and controlled as ET’s spaceship!


Mobility

For maneuvering around your workshop or when positioning under a vehicle, the four steel caster wheels give you a smooth rolling action. The two rear wheels rotate 360 degrees for all angle movement.

The Pittsburgh Automotive Floor Jack is a heavy jack to be lifting about the place, but these solid cast wheels will allow for you to pull it instead.

For the prevention of accidental knocks, dings or scrapes to any bodywork while using this jack, the one piece pump handle has a full rubber protective sleeve.

Well then, we have now just discussed the features and abilities of the Pittsburgh Automotive low profile jack. So, let’s now continue and point out what we like and don’t like about this model.

Pittsburgh Automotive Floor Jack Pros & Cons

Pros

  • Extreme low to high range of lifting abilities.
  • Versatile suitability to many different vehicles.
  • Very strong and durable
  • Very quick pump lift action.

Cons

  • Heavy construction.
  • No protective cover fitted to the saddle.

Plus Points Are Aplenty For This Jack…

As soon as you lay eyes on this jack, you will notice how sturdy and well made it is. This is an industrial grade jack perfectly designed to suit any busy auto trade workshop or to have at hand in your own private garage.

We know what you are thinking, though. Low Profile Jacks are not suitable for lifting any other kind of vehicle. Well, that is where you would be wrong!

A true master of the 2 in 1…

With a three-ton lift capacity combined with an ultra-low profile and high lifting ability, this is one of the few jacks around able to suit not just lowered custom or sports cars. You can still also lift regular vans, SUVs, trucks, and cars too. This jack is a true master of the 2 in 1.

Whether you are doing a quick and simple wheel change or you need to raise a vehicle to sit on jack stands for more extensive work then this is a jack that will quickly and easily do just that.

Floor Jack

Safe as houses…

The strength and durability are both great features, but without safety, they don’t mean so much. For this very reason, the Pittsburgh Automotive Floor Jack is equipped with a universal joint release system.

You have full control of the raising and lowering speed direct from the handle position, safe in the knowledge it will not let your vehicle come crashing down to the ground.

Speedy lift…

Besides the fantastic low and high profile lifting ability, the other great stand out feature of this jack is the speed of the lift. Thanks to the dual parallel pump system, you can get to the highest point of just under twenty inches in only three and a half pumps of the jack.

This rapid pump technology results in lifts that are way less than half the standard ten pumps most other jacks require. You can be lifting cars as fast as the pit crews at NASCAR!


Just A Couple Of Negative Points We Will Just Mention For You To Bear In Mind

First is the weight. This is a heavy jack at 71.7 lbs. This is a drawback when comparing any steel constructed jack to an aluminum one. Aluminum is becoming much more popular these days because of the obvious weight advantage. But strength and quality are compromised with these units.

The only other issue we can see is that the saddle base is unprotected bare painted steel. Working with jacks under cars sometimes will result in knocks or scrapes to under bodywork.

The addition of some kind of protective surface would be good to avoid this, as well as aid for extra grip to the body. It is an issue that really is not the end of the world and something that if you really feel is necessary; you could easily add yourself.

So, what do we think of the Pittsburgh Automotive Floor Jack?

So as a conclusion to this review, we would start by saying that what we are looking at here is a really great jack. Finding the best floor jack is always a tricky task. Each garage or workshop is different and with different requirements.

The Pittsburgh Automotive Floor Jack undoubtedly does offer a very good alternative that is able to lift a wide variety of vehicles with all kinds of specifications.

There is no question in our minds to give this floor jack our complete seal of approval.

Rate this post