This article may contain affiliate links. When you purchase through links on our site, we may earn an affiliate commission.
The need for speed and a surge of adrenaline is a constant that needs to be fulfilled in humans, albeit with a little dose of caution. The urgent need to fill that gap has led to the invention of several high paced sports that constantly leaves both player and audience on their toes.
Driving on a safe road slowly sure makes you feel drowsy, and a touch of “nitro” every now and then is sure to keep both your car awake and you, very much alive. This mystery real life nitro boost is an all round booster as it increases your vehicle’s fuel economy while enabling rapid acceleration.
This is known to improve your happiness index and apparently, improves your performance.
As is commonly said, the engine of a car is its heart and soul. Without proper care and maintenance, it crashes! The Pedal commander has however so far shown commendable service by creating the perfect device which eliminates response delays in your electronic gas pedals and making them available to buyers all over the world without undue stress.
- What Is The Pedal Commander?
- Four Modes…
- How Does The Pedal Commander Work?
- Is The Pedal Commander Useful?
- Pros And Cons Of The Pedal Commander
- Who Should Buy The Pedal Commander?
- Popular Pedal Commander Models
- How To Operate A Pedal Commander
- How To install A Pedal Commander
- The Various Pedal Commanders Modes, What Are They?
- Is Using The Pedal Commander Hazardous To My Vehicle?
What Is The Pedal Commander?
The Pedal Commander is a throttle response controller that helps your car respond faster to gas pedal pushes, essentially by removing response delays on your electronic accelerator pedal.
It summarily allows your engine to respond faster, in turn, accelerating your car faster! It, however, is only compatible with vehicles that have electric gas pedals. This is because older (manual-gear type) cars tend to be more responsive.
Digital (electric, automatic-gear type) pedals? Well, maybe they’re not so digital after all.
Each Pedal Commander is individually programmed for specific engines, as well as transmissions, and for individual makes and vehicle models.
Every Pedal Commander features four unique performance modes. These include Sport, Sport+, ECO, and City mode. Each of these has eight adjustable pedal sensitivity settings.
It does not void a vehicle’s factory warranty nor safety, features a 3M keypad for easy hand-held push-button control, and is easy to install. We estimate in less than ten minutes and as a novice. It has OEM-quality connectors that link to its special super small sized CPU that give you real-time speed calculations.
Finally, more recent Pedal Commanders models have full Bluetooth compatibility. This enables you to control the device’s setting from your phone. As such, you can keep the Commander’s control pad hidden from plain view.
The Pedal Commander works by removing the delay disadvantages of electronic gas pedals so your engine can respond faster. After its very easy and short installation process, you will notice vastly increased engine response, faster acceleration and save fuel by up to 20% dependent on what mode you select! Summarily, you get a more pleasurable drive.
The Pedal Commander works by providing a simple, unique-to-manufacturer improvement to your vehicle’s performance. It has been drafted to speak your vehicle’s language and speak to its needs while saving you on fuel costs.
That is the reason why each and every car model has a different commander type. It is a modulator that injects into each cars drive and encourages them to do more, and in a language they understand, because they always do!
Performance parts are used by all cars by their manufacturers to improve their performance. The Pedal Commander is one such type of performance parts, only one that is available to the public and not marketed as a “miracle drug” in a few super-priced vehicle variants.
It is is very useful as a secondary improvement to your vehicle because it is relatively affordable, and does not harm your vehicle in any way. Instead, it improves your vehicles ability to manage fuel, horsepower аnd torque. It is quite the “pill”.
The Pedal Commander is for all car owners, drivers, and enthusiasts. This device enables you to enjoy a personalized relationship with your car by letting it and you explore the possibilities of enhanced vehicle performance.
If you are a multi-model driver, you understand the responsivity difference between manually operated vehicle models and the newer digital models. The Commander bridges that gap by providing the remedy to the response delays on your gas pedal.
If you drive a digital model vehicle, the Pedal Commander is for you.
Currently, the ten top-selling Pedal Commander models are listed:
All of the above models are Bluetooth compatible, so they can be tucked away nicely. They all have the same duty of moderating your vehicles fuel consumption while boosting your engines ability to deliver torque and physically appreciable horsepower.
With this product, any one of these, you just have to select your vehicle model and you’re good to go! It’s very easy installation process ensures you will be, in no time.
To operate the pedal commander, you press between the four adjustable modes and their sub-options until you are happy with your selection. These buttons are physically present on the commander. For you as a first time user though, you may need to test drive with each mode to become more familiar with them.
There is no need to turn your pedal commander unit on or off. Your car starts, it starts. You power down, give it five minutes, it does so too.
To sync with Bluetooth to enable you to control the unit remotely, you need to do the following:
- Download the Pedal Commander application to your Android or iOS device.
- Switch on your phones Bluetooth and follow the instructions in the app. At some point though, the app will ask you to input the 6-digit serial number on the back of your Commander. After you input the 6-digit number, as long as the Bluetooth on your phone is on, it will automatically find the Pedal Commander and start up in the last mode you left it in. To change it, just open the app, click connect and do as you wish. Bluetooth range is an average of 15 feet, which is a lot more than you would need.
Since the Pedal Commander is practically automatic, after selecting your favorite mode, just drive like you normally would, all the while enjoying the improvements to your “new ride”.
The ten-minute process of a Pedal Commanders installation follows a simple ten step process. Read on…
- Shut your vehicle down for about five minutes.
- Locate your vehicle assembly plug. If you are not sure what that is, you should look in your car’s manual.
- Disconnect the assembly plug.
- Plug the Pedal Commander’s connectors into their co-ordinating plugs on the gas pedal.
- Tuck the cables in place, so nothing can hook or disconnect them later on. Also, avoid leaving them in a dangling position.
- Route the Commander to where you can access it easily. A permanent tuck, if you prefer to use it with Bluetooth.
- The alcohol wipe that comes in the box should be used to clean the unit mounting area.
- Apply the velcro to the Commander’s bracket and the cleaned mounting area.
- Put the Pedal Commander in the bracket and you are done.
- Then just enjoy your drive.
Easy as pie, don’t you think?
The Pedal Commanders four program selections are ECO, CITY, SPORT, and SPORT +.
The Eco mode is used for fuel savings, smoother driving and offers better traction control in heavy weather conditions or for Off-Roading purposes. Pressing and holding the Program button for 3 seconds will switch you to ECO Mode.
The City mode is perfect for daily driving, Sport mode: spirited driving, while the Sport + mode is most ideal for racing at the track or performance driving.
Each mode has 9 different sensitivity levels (up to 36 levels in total) to be totally specific and pleasing to your needs. These can likewise be accessed by pressing the program button.
There is also a “Stock mode”. This essentially means switching off the Pedal Commander and running on your vehicles regular settings.
The Pedal Commander Product does not interfere with the functions of your car. It simply enhances vehicle performance. It is only designed to work when you need its services such as times when you need to accelerate and this does not affect your car.
In fact, your car still has full control of the processes as the Pedal Commander is not injecting anything into your vehicle system, it only is boosting and showing you the otherwise hidden secrets of your car.
It never pushes a car beyond the limits of its original safety standards. This, therefore, will never cause your car any harm. Besides, all Pedal Commander Products are completely legal and are certified safe to use by both State and Federal regulatory agencies both locally and Internationally.
Therefore it is perfectly safe and you will not be breaking any state laws by driving with it in your vehicle.