This article may contain affiliate links. When you purchase through links on our site, we may earn an affiliate commission.
The kids are loaded distracted with electronic devices, groceries are in the back, and you’re ready to go. Small problem though, the door on your Honda Odyssey refuses to close. What do you do?
You can’t drive down the street with the side door wide open, and no matter how hard you tug, it just won’t budge. For Odyssey owners, it’s a good idea to be prepared for this situation, so should you face it, you’ll know exactly what to do.
I’ve put together some tried and tested solutions to this issue so you and the door won’t be stuck.
- Odysseys Built Between 1999 and 2011
- Odysseys Built After 2011
- The Door Opens Again After Closing
- The Door Won’t Close The Entire Way
- The Sliding Door Won’t Latch
- Need Some Quality New Tires?
- Final Thoughts
Odysseys Built Between 1999 and 2011
Generally, there are two main issues that cause Honda Odysseys sliding doors not to close on cars built between 1999 and 2011. Both are very simple to check and can be done quickly, usually providing a successful result.
The first thing you will want to try is to jump inside your vehicle and position yourself along the second row of seats. Near the doors on either side, locate a handle that should be very close to where the seat belts are.
Give it a Pull
Give that handle a good tug, and your problem might be solved incredibly quickly! If that didn’t work, though, don’t panic. There is still another step to try, and it’s even easier than tugging on the second row seat belt handle.
Jump into the driver’s seat and take a look on the dashboard. Locate the door buttons, and give them a press. You might find that the door now suddenly closes. If so, then great; if not, there is still one more method to try.
Freshly Laid Rubber
The other most common issue will require you to take a look at the affected door. Focus your attention on the opening near the top of the door. You are looking for a rubber bumper between the rail and the door.
After an inspection, if you can’t see one, or if it’s damaged, this could be your issue. This piece commonly becomes dried out and breaks down over time. They often fall off without even being noticed until the door won’t shut.
This part is inexpensive, and it’s worth having a spare stashed inside your vehicle just in case. Rubber tends to dry out and deteriorate over time, and having this on hand could save a lot of trouble.
Installation is incredibly easy and can be done anywhere without the need for any tools. Position the bumper with the hook edge facing the sliding door rail, and it should easily slide right on in. Simple as that. Give the door a try, and it should be just like new.
Odysseys Built After 2011
For owners of newer model Honda Odysseys, you might be experiencing a slightly different issue with your door. After pushing the sliding door buttons, the car just makes an annoying beeping sound at you. So why won’t the door close?
The most common solution to this issue can be found by sitting yourself in the driver’s seat. Taking a look around the steering wheel, you are searching for a toggle switch located near the steering wheel button. Ensure it is in the “Up” position, as when in the down position, it will prevent the door buttons from operating.
Still Not Working
While these are the most common problems faced when it comes to door issues with the Honda Odyssey, there still could be other issues. Hopefully, your doors are already operating smoothly again, no matter what the year of your vehicle.
I still have some more methods for anyone facing other issues with their doors. If you’re still having other issues, most of them are relatively easy to identify and correct. Even if you have no previous mechanical knowledge, take a look because most of these solutions are simple.
The Door Opens Again After Closing
Sometimes when you close the sliding door, it goes the entire way but then bounces back and stays open just a fraction. It’s not enough to cause panic, but enough for concern. There might even be a beeping noise, plus the “door open” light might be illuminated on the dash.
Another concern with this issue is that the door hasn’t been latched correctly. It could open while driving, or someone could access the vehicle while parked. This isn’t likely, but can still be a possibility. Better to have this fixed.
Having The Right Contacts
My recommendation for this issue is to power down the door master switch located on the dashboard. Next, open all the doors manually, inspecting the pillars and contacts on each one. Give them a clean with rubbing alcohol and a cloth.
Now would also be a good time to check any rubber seals around the doors too. You might be able to simply push them back in place. If they are damaged or deteriorated, they will need replacing. Here are the parts required:
This rubber seal is suitable for use with the sliding door for Odysseys made after 2011. The part number is 72868-TK8-A03.
This rubber seal is suitable for drivers and passenger doors on all Honda Odysseys. The part number is 72828-SHJ-A02.
The Door Won’t Close The Entire Way
Another issue you might encounter is when attempting to close the door, it only goes part of the way and then stops. It just won’t go any further. The first thing to try in this instance are the same things I suggested at the beginning of this article.
If, after trying, you are still unsuccessful, you will need to perform a manual reset. This will involve disconnecting the battery, which will require some basic tools. If you follow my basic steps, it can be performed safely, quickly, and easily.
How to Disconnect and Reconnect The Battery?
Pop the hood on your Odyssey, and latch it open. Find yourself either a 10 millimeter wrench or socket set and loosen the terminal on the black negative side. Remove it from the battery for around 30 seconds, then place it back and tighten it up. Close the hood.
Disconnecting the battery will perform a manual reset of your entire vehicle. You will need to reset items inside, such as clocks and the stereo system. This should also reset the doors too.
Time for a Test Run
After completing a manual reset with the battery, sit in the driver’s seat. You will need to find that same toggle switch near the steering wheel and place it in the “Down” position for 30 seconds. After waiting, place it in the “Up” position.
You can now try the sliding door buttons to see if the issue has been resolved. If the doors don’t activate when pushing the button, try resetting the toggle switch again. This should allow the doors to now close correctly.
The Sliding Door Won’t Latch
There are usually two different reasons why the door won’t latch correctly. This first is the fuse needs resetting, and the second being the sensors require cleaning. Both can be attempted yourself; however, in this instance, a trip to the workshop might be required.
Before spending money on a mechanic, and as long as you are confident, there is not really any risk giving it a go yourself. Follow these simple steps, but if at any time you are unsure, let a professional take over.
Checking The Fuse
In the front of your vehicle on the passenger side, first, locate the fuse box. After removing the panel, which should just pull out, you are looking for the 13th fuse. It might even be labeled as “clock reset.”
In the inner cover of the fuse panel will be a diagram to confirm which fuse you are searching for. Once the correct fuse is located, remove it by pulling it firmly. Wait for 30 seconds, and then replace it back in its original position, pushing it firmly.
You should always have some spare fuses inside your vehicle. If you don’t have some, check out the Riseuvo – 220 Piece Assorted Automotive Fuses.
Presented in a handy plastic case is a range of different fuses of different Amps ratings. A handy fuse removal tool is also included, so removing them is much easier. Both standard and mini fuses are provided for use across a wide range of applications.
My Slidy Sense is Tingling
To clean the sensors, they are located on both the door and the body of your vehicle. Taking a clean cloth, and applying some rubbing alcohol, ensure the sensors are completely clean. You can even use a cotton tip to access the smaller areas.
If, after checking both the fuse and cleaning the sensors, the door still won’t latch properly, unfortunately, a trip to the workshop is necessary. At the very least, the mechanic will be impressed with your DIY efforts.
Need Some Quality New Tires?
Then check out our reviews of the Best Tires for Odyssey you can buy in 2022.
And if you love your bicycle, you may be interested in our reviews of the Best Bike Rack for Honda CRV.
By now, your Honda Odysseys door should be back up and running, fully operational. I highly suggest familiarizing yourself with the location of the toggle switches, door switches, latches, rubber bumpers, seals, and sensors.
I would also highly recommend making sure you have the correct parts accessible by purchasing them from the links provided. If any of these issues arise while you’re out and about, you can be fully prepared knowing exactly what to do.
Most of the causes are simple fixes, like an incorrectly set switch or a missing piece of rubber, and can be performed anywhere.