Brake Pad Replacement Cost

This article may contain affiliate links. When you purchase through links on our site, we may earn an affiliate commission.

Are your brake pads starting to get a bit old and worn?

It is essential that your brake pads are in perfect working condition at all times. Otherwise, you might be in serious trouble if you have to brake suddenly to avoid an accident.

brake pad replacement cost

It is important to work out the brake pad replacement cost before you commit to the work. This will ensure that you have a sufficient budget, and ideally, a little extra in case it is needed.

So, let’s find out how much it will cost and the work that is involved…

The Cost of Replacing Your Brake Pads

The exact cost of replacing your brake pads depends on several factors, such as the make and model of your vehicle. However, the price ranges from $30 to $50 for two to four pads per wheel. If you decide to have a mechanic do the work for you, the typical cost is $150 to $400 per hour.

How Long Do Brake Pads Last?

The length of time that your brake pads last before wearing out will vary from vehicle to vehicle again. It will also naturally depend on how much you use your vehicle. On average, your brake pads are designed to last for around 50,000 miles.

However, certain driving styles and environments can wear out brake pads more quickly. Budget brake pads are likely to be less durable than high-quality brake pads. Performance brake pads are designed for repeated abuse and intense driving, although this leads to lower durability.

The Different Types of Brake Pads

Before you replace your brake pads, you need to consider the different options. Brake pads come in a wide range of shapes, sizes, and types of construction. However, there are three main types of brake pads, each of which comes with pros and cons to think about.

Non-Metallic Organic

Non-metallic organic brake pads utilize organic fibers within the friction surface of the brake pad. These brake pads offer virtually silent operation. However, it’s important to note that they tend to wear out comparatively quickly.

brake pad replacement cost guide

Semi-Metallic

This is the most common type of brake pads. The friction surface consists of embedded metallic fibers, which help reduce the amount of brake fade at high temperatures. However, these brake pads typically produce more significant amounts of brake dust compared to ceramic brake pads.

Ceramic

While ceramic brake pads are the most expensive type, they offer premium performance and longevity. The brake pads are created from a combination of ceramic and copper fibers that are embedded in the friction surface. Ceramic brake pads wick away heat with less fade while reducing the amount of brake dust.

How to Tell When Your Brake Pads Are Worn?

If your brake pads are worn out, you are likely to lose braking performance or pressure. You may also notice a squeaking noise coming from your brakes. This is caused by the slot in the backing plate of the brake pad and is an unmistakable sound.

the brake pad replacement cost

What to do?

Ideally, you want to fully replace your brake pads before they get to this point. Therefore, it is crucial to make sure that you check your brake pads regularly. This is particularly important if you’re planning to embark on a long road trip.

Replacing Brake Pads Safely

You can save yourself hundreds of dollars by replacing your brake pads yourself. However, this can be a very messy and dangerous task if you do not take the proper precautions. In addition to ruining your clothes, you could lose a finger or worse during the process.

Therefore, it is essential to wear thick mechanic gloves while replacing your brake pads. You will also want to wear a pair of high-quality goggles. Make sure you wear old clothes, as they are likely to get covered in brake fluid and oil.

What You Need to Replace Your Brake Pads?

Make sure that you have all the tools you need close to hand before you start the task. You will need a car jack and its jack stands, a wheel chock, a lug wrench, and a selection of wrenches. Other essential tools include large face clamp pliers, light brake caliper grease, and of course, your new brake pads.

Take the time to organize your tools so that everything is within easy reach while you work. You will need a flat workspace like a garage floor, street parking, or driveway. If you are planning to work on the street, make sure you will not violate any local laws.

How to Replace Your Brake Pads?

Start by lifting up the front of your vehicle and loosening the lug nuts on the front wheel. Place the jack stands on the front part of the frame and remove the first wheel. Find the mounting bolts of the brake caliper and remove them.

Use a flathead screwdriver to remove the anti-rattle clip, taking care to prevent it from flying off. Slide the caliper off the rotor and rest the caliper on the top rotor, so it does not hang by the brake line. The mounting bracket of the caliper will remain in place.

It is now time to remove your worn brake pads. You may find that the brake caliper piston is extended. Use your face clamp pliers to grip the piston, with the other side on the steel backing of the caliper. Press the piston as far as it can go into the caliper until it sits flush, taking care not to damage the piston’s rubber.

brake pad replacement cost tip

The next part can get a little finicky…

Take the inboard brake pad and place a little brake pad lubricant on the back of it. Firmly press into the opening of the piston until it locks in place. Take the outboard brake pad and place a little brake pad lubricant on the back of it.

Rest the outboard brake pad on the caliper mounting bracket that is still attached to the rotor. Slide the caliper with the onboard brake pad attached to it back onto the mounting bracket using the outboard brake caliper. Lubricate the mounting bolts of the caliper and reinstall them.

Nearly done…

Reattach the anti-rattle clip and then repeat all the steps for the other wheels. Reattach the wheels and tighten the lug nuts by hand. Raise the jack enough so that you can remove the jack stands and then lower your vehicle.

Torque the lug nuts to the designated specification from the manufacturer, then pop the hood and remove the brake fluid cap. It is now time to pump the brakes to make sure that braking pressure has returned and that all the air has been removed from the system. If the brakes feel smooth, the task is complete, and you are ready to hit the road.

Where To Find New Brake Pads?

When considering brake pad replacement cost, be aware, your brake pads are not an area where you want to pinch pennies. If you choose an inferior product, there is a chance that your brakes could fail. Let’s take a look at some of the best options that are available to purchase right now.

ACDelco Silver 14D698CH Ceramic Rear Disc Brake Pad Set

These brake pads are designed for the rear brakes and combine great performance with affordability. The brake pads feature a ceramic formulation that uses less metal to deliver quality braking power that produces low-dusting and noise. The brake pads come ready to install and include basic shims, slots, and chamfers.

Wagner QuickStop ZD465A Ceramic Disc Brake Pad Set

These QuickStop Ceramic front brake pads boast an application-specific design to help reduce noise-causing vibration. These offer a low copper 2021 compliant ceramic formulation and are brake pads designed, tested, and certified for OE performance.

The brake pads also feature a post-cured process that provides even friction performance as well as enhanced durability.

brake pad replacement cost tips

Bosch QuietCast Premium Ceramic Rear Brake Pads (BC905)

These brake pads have been engineered to deliver incomparable stopping power and quiet operation while producing minimal brake dust. The unique shim style of the brake pads reduces noise while increasing corrosion resistance and overall strength. The brake pads are free from copper and utilize aerospace engineering-grade aluminum-based alloy.

ACDelco Gold 17D1367CH Ceramic Front Disc Brake Pad Set

These front brake pads have been tested to SAE J2784 standards for braking effectiveness, Noise/Vibration/Harshness, and durability/wear. They utilize ceramic, semi-metallic, and organic formulas to make them extremely safe and reliable. The brake pads come ready to install, complete with premium shims, slots, and chamfers.

For more superb options, check out our comprehensive reviews of the Best Brake Pads currently on the market.

If You’re Changing Your Brake Pads Yourself

Please read my in-depth reviews of the Best Car Brakes, the Brake Bleeder Kits, the Best Brake Fluid, the Best Breaker Bars, the Best Torque Wrenches, the Best Tap and Die Set, and the Best Brake Rotors you can buy in 2021.

Depending on your vehicle type and model, you’ll also want to have the Best Aluminum Floor Jacks, the Best Low Profile Floor Jack, the Best 3 Ton Floor Jacks, the Best High Lift Floor Jacks for Trucks SUVs, or even the Best Garage Car Lifts that are available to purchase right now.

Back to replacement costs for brake pads

Final Thoughts

It’s essential to make certain that your brake pads are in good working order at all times. Driving with worn brake pads can be extremely dangerous. Therefore, make sure that you check your brake pads when you do your routine vehicle check.

With a bit of time, patience, and the right tools, it is possible to replace your brake pads yourself. However, it’s essential to make sure that you know exactly what you are doing. If you are in any doubt, it is best to enlist the services of a professional mechanic.

Happy motoring.

We will be happy to hear your thoughts

Leave a reply