This article may contain affiliate links. When you purchase through links on our site, we may earn an affiliate commission.
Have you noticed something a bit wrong with your brakes?
Your brakes are essential and need to be working correctly at all times. Otherwise, your brakes could fail when you need them most, resulting in a severe accident.
If your brakes are not working smoothly, the brake pads and rotors probably need to be replaced. While this is a relatively quick and straightforward process, you need to make sure you have the right budget.
So, if you are wondering about brake pad and rotor replacement cost, let’s find out…
What Are Brake Pads and Rotors?
Before you get ready to replace your brake pads and rotors, make sure you know what you are looking at. There are several key parts of the brake system that are likely to need to be replaced. Each of these parts provides an important function that keeps your brakes operating smoothly.
The brake pads create friction and reduce the rotation of the wheels so that they eventually stop moving. Brake pads can be made from various different types of materials, which affect their performance and durability. In terms of overall performance, brake pads made from ceramic or composite materials are the best options.
The rotor is a disc with a smooth surface that is connected to the wheel and connects with the brake pad. If your brake pads are not replaced when they are worn, they can scratch and damage the rotors. It is important to choose replacement rotors with the minimum thickness specified by the manufacturer.
The role of the calipers is to squeeze the brake pad onto the rotor, applying the pressure to stop the wheel’s rotation. The calipers are very rigid and durable, so they do not need to be replaced as often. If the wear on your brake pads is uneven, your calipers probably need to be replaced.
Everything used to connect the brake pads, rotors, and calipers are referred to as hardware. The hardware is generally very durable and does not need to be replaced often. Simply check the hardware visually as part of your routine brake check.
When To Change Your Brake Pads?
The exact durability of your brake pads will depend on the material they are made of. If you tend to press down on the brake quite hard, it will make the brake pads wear out more quickly. However, the brake pads typically need to be replaced after 25,000 to 75,000 miles.
Look for the signs…
It is essential to remain vigilant and be aware of the signs that your brake pads are wearing out. Your car may have a warning light that lights up when metal-to-metal contact is made between the brake pads and rotors. In this case, you need to get your car serviced as soon as the light appears.
Listen for sounds…
There are several other signs, such as a pitch noise coming from the wheels or a squeaking or grinding sound. You may notice signs of a dark fluid leaking, a slight loss of control when braking, or a lit ABS caution light. It is a good idea to take your vehicle to be checked by a trusted mechanic in any of these cases.
Brake Pad Replacement Cost Comparison
To make sure you’re getting the best deal on brake replacement, it is best to shop around. However, a few different parts may need to be replaced, which will affect the price. The quality of the replacement parts you choose will also affect the overall cost.
The Brake Pads
The overall cost of the brake pads depends on the type that you choose. Brake pads start at $50 and run up to $150 for top-of-the-range products. The labor cost is typically $100, making a total of $150 to $250.
Replacing the rotors is more expensive and time-consuming than replacing the brake pads. Rotors typically cost between $200 and $400. The labor cost is $150, making the total replacement cost $350 to $550.
The calipers typically range in price from $50 to $100. Paying a mechanic to replace your calipers is likely to set you back $100. Therefore, the total replacement cost will be $150 to $200.
Bear in mind that it’s not always best to simply opt for the lowest price. Cheaper parts tend to wear out more quickly and are likely to cost more in the long run. While some mechanics may charge more initially, they may provide you with replacement warranties.
How to Install Brake Pads Yourself?
When considering Brake Pad and Rotor Replacement Cost, remember that you can always DIY if you have a little know-how and the right tools and parts.
Replacing your brake pads and rotors yourself can save you at least $100 on labor fees. However, before you get started, it is critical to make sure you know what you are doing. If you do not install the new parts correctly, it could lead to a serious accident.
So take it slow, step by step…
If you do decide to tackle this task yourself, start by loosening the lug nuts and removing the vehicle wheel. Remove the lower bolt from the caliper and turn the caliper to enable easy access to the brake pad assembly. Remove the clips that are used to hold the brake pads in place and remove the brake pads.
Fit your new brake pads and apply a sufficient amount of lubricating grease. Open the brake fluid reservoir cap and retract the pistons. Slide the caliper back into the correct position and then tighten the lower bolt to complete the process.
Choosing The Right Brake Pads and Rotors
Replacing your brake pads and rotors yourself can save you a lot of money and trouble. In addition to the financial savings, there will be no need to part with your car for several days. Here are some of the top brake products that you can use to complete the task.
Power Stop K3053 Front Brake Kit – Best All in One Front Brake Replacement Kit
The Power Stop Carbon-fiber ceramic compound has been designed to enhance braking performance. The kit comes complete with drilled and slotted performance rotors for maximum cooling during use, which results in minimal dust. The rotors are zinc plated to provide maximum protection against rust and other types of corrosion.
BOSCH 50011245 QuietCast Premium Disc Brake Rotor – Best Replacement Rotor
If you are simply searching for a replacement rotor, this product from BOSCH is sure to suffice. It has been made from aluminum and is perfectly balanced to deliver smooth operation with no pedal pulsation. It is fitted with G3000 heat-flowed castings that provide consistent wear as well as long life and very quiet operation.
Autospecialty KOE3118 1-Click OE Replacement Brake Kit – Best Full Replacement Brake and Rotor Kit
This full kit provides you with everything you need to replace your brake pads and rotors. The rotors utilize G3000 castings and are mill balanced for perfect stock performance and safety. The Autospecialty kit comes with all of the required installation hardware as well as clear and detailed instructions.
More on Replacing Your Own Brakes
If you’re going to DIY, make sure you have the right tools. Depending on your vehicle make and model, you’ll want to have the Best Low Profile Floor Jack, the Best Aluminum Floor Jacks, the Best 3 Ton Floor Jacks, the Best High Lift Floor Jacks for Trucks SUVs, or even the Best Garage Car Lifts for your money.
OK, back to costs for brake pad and rotor replacement…
It is essential to make sure that you check your brakes often to make sure they are working correctly. While you are on the road, you may notice that your brakes are squeaking slightly. This can be caused by several factors and needs to be investigated before you embark on a road trip.
Moisture on the brake pads can cause them to squeak when they contact the brake rotor. However, squeaking brakes are also a common indicator that your brake pads are wearing thin. Either way, squeaking brakes is not something that you should simply ignore.
Stay safe on the road!