This article may contain affiliate links. When you purchase through links on our site, we may earn an affiliate commission.
Working on your motorcycle is all part and parcel of motorcycle ownership. The majority of us will carry out maintenance or repairs on our bikes at some point, even if it’s only to change the oil or put on new pads and discs.
Although working on bikes is easier than cars, it’s always nice to have a helping hand to make life a little easier. The Best Motorcycle Lift Table can do this and more. A good lift table makes working on your bike much easier than when it’s low down on the center stand.
Adventurous and exciting…
The good news is that buying a decent stand doesn’t need to cost a fortune. A stand may save you money in the long run by encouraging you to take on more adventurous and exciting projects.
To help you with your decision, we’ve got four affordable motorcycle lift tables for you to take a look at. We hope there’s one on the list that is good for you and your bike or bikes.
So, let’s take a closer look and find the best lift table for your motorcycle…
- Top 4 Best Motorcycle Lift Table You Should Buy Reviews
- 1 Extreme Max 5001.5044 1000 lbs. Motorcycle Scissors Jack – Wide – Best Scissor Jack Motorcycle Lift Table
- 2 Extreme Max 5001.5083 Hydraulic Motorcycle Lift Table – 300 lb. – Tallest Motorcycle Lift Table
- 3 Pyle Motorcycle Scissor Jack Lift – Best Portable Motorcycle Lift Table
- 4 300lb Motorcycle Hydraulic Scissor Floor Jack Lift Hoist Center Stand Lift – By Choice Products – Best Dirt Bike Lift Table
- Best Motorcycle Lift Table Buying Guide
- Looking for something else?
- What is the Best Motorcycle Lift Table?
Top 4 Best Motorcycle Lift Table You Should Buy Reviews
1 Extreme Max 5001.5044 1000 lbs. Motorcycle Scissors Jack – Wide – Best Scissor Jack Motorcycle Lift Table
The Extreme Max motorcycle scissor lift table is compact with a maximum weight capacity of 1,000 pounds. That’s enough to lift the majority of bikes. However, if you have something like a Harley Electra Glide, it’s still not going to be strong enough.
It measures 15.2” x 9” and is made from heavy-duty steel. The stand is resistant to dirt, grease, and oil. The platform is well-padded to protect your motorcycle’s paintwork, prevent slipping, and maintain stability.
Easy access to every part…
This is a scissor jack stand that effectively leaves just about every part of your bike accessible. Whether you’re carrying out repairs, routine maintenance, or giving it a good wash, you’ll have no problems getting to every nook and cranny.
The Extreme Max lift table is lowered and raised by using a 7/8 inch socket wrench. It works well enough, but it is a little slow. The socket wrench isn’t provided but, it’s such a common tool that its omission is hardly likely to be a deal-breaker.
Good stability when extended…
The lift tops out at 14” and remains relatively stable even at this extended height. However, you can’t escape the physics, so a little bit of extra caution around your bike is advisable when it’s in the air. We’re sure you’ll agree, a reasonable precaution at any height.
Low profile and easy storage…
One final feature is that the lift has a low profile when it’s collapsed. It measures just 3 ⅜” high. This means it is easy to slip under your motorcycle before you start work. Plus, it’s easy to store even if space is limited.
This well-built motorcycle lift table also comes with a full 12 months manufacturer’s warranty.
- 1,000lbs weight limit.
- Well padded.
- Easy to store.
- 12 months warranty.
- Slow to raise and lower.
2 Extreme Max 5001.5083 Hydraulic Motorcycle Lift Table – 300 lb. – Tallest Motorcycle Lift Table
This is a hydraulic motorcycle lift table that can lift your ride as high as 34.5” in the air. The maximum weight limit is a modest 300lbs. This makes it most suitable for working on smaller bikes or dirt bikes.
It measures 16.25” x 13.25” and is constructed from heavy-duty steel. It’s resistant against dirt and grease. Additionally, it’s easy to clean too. Plus, the platform is coated with hard-wearing non-slip rubber that will help prevent damage and keep your bike firmly planted on the platform.
The cool thing is that once your ride is in the air, there will be no need to stoop around to work on it. Whether you clean it, repair it, or carry out routine maintenance, your back is going to thank you.
Easy to use…
Getting the platform up into the air and back down again couldn’t be easier. The lift works by using the integrated foot pedal. It’s quick and easy to use, and the hydraulics thankfully take up most of the strain.
Another big plus is that it’s all a hands-free operation. This makes keeping an eye on your bike as it’s lowered and raised so much easier. Unlike a lot of motorcycle lift tables, this is truly a one-man job.
Added stability and safety features…
Once your bike is in the air, the lift table’s wheels can be locked in place. When combined with its wide wheelbase, this ensures a high level of stability. For extra security, the lift table also comes with a ‘J’ hook to hold the bike on the table.
One final, and possibly most important, piece of security is a locking bar that can be deployed over the lifting mechanism. It prevents the table from being dropped if the release lever is somehow accidentally stepped on.
- Easy to lower and raise.
- Can be operated hands-free.
- High maximum height limit.
- Lifting mechanism locking bar.
- Low maximum weight limit.
3 Pyle Motorcycle Scissor Jack Lift – Best Portable Motorcycle Lift Table
The Pyke scissor jack motorcycle lift table comes with a dolly included. It’s made from durable reinforced steel alloy and measures 14.6” x 9”. It has a maximum weight capacity of 1,100lbs. This makes it suitable for all but the very heaviest of motorcycle cruisers.
Rubber coating on a steel frame…
The top of the platform is coated with ¼” thick rubber to protect your bike and help keep it on the stand. The rubber platform and the steel alloy frame are both easy to clean and have high levels of dirt and grease resistance.
The minimum height of the lift table is 3.0” and the maximum height is 16”. This is a full 2” higher than the maximum height the Extreme Max can achieve. The fact is, that although 2” doesn’t sound a lot, it’s significant.
If you choose to mount the lift table on the dolly, you get an extra 3” of height. That gives the Pyle stand a full 5” advantage over the Extreme Max stand. Now, who wouldn’t want an extra 5”?
However, lifting the stand, and lowering it, requires the use of a ⅞” socket wrench. It’s not our preferred system as it takes time and effort to operate. Additionally, it means you have to kneel on the floor, and it doesn’t leave you hands-free.
Portability and mobility…
The inclusion of a dolly makes a much more interesting proposition. The first advantage is that it expands the profile of the lift table and therefore adds a little extra stability. The second obvious advantage is that the dolly allows you to move the bike around for better access or easier storage.
If you need to regularly move your bike around, then this is the Best Motorcycle Lift Table on our list.
- Dirt and grease resistant.
- Easy to move during use.
- Time-consuming to raise and lower the platform.
4 300lb Motorcycle Hydraulic Scissor Floor Jack Lift Hoist Center Stand Lift – By Choice Products – Best Dirt Bike Lift Table
This is a hydraulic scissor lift table. It has a steel frame and a rubber-covered platform that measures 16” x 13”. Both the frame and the ribber platform have high stain-resistant properties and are also, thankfully, easy to clean.
Convenient hydraulic operation…
The lift works by operating the hydraulic foot lever. It’s easy to operate and will quickly and effortlessly take your ride from 15” off the floor up to 38”. It is a hands-free operation that thankfully doesn’t involve rolling around on the floor of your garage to operate. Consequently, it’s a system that’s likely to always gets our vote.
Great for dirt bikes and small motorcycles…
The lift has a maximum capacity of 300lbs. This makes it suitable for most dirt bikes and smaller motorcycles.
However, you should be aware of something if you have a small motorcycle. You need to ensure the ground clearance is sufficient that you can easily get the bike over the stand before lifting it in the air.
Stable and secure…
Once the lift table is in the air, you can attach two hooks onto your bike for extra stability. The Choice floor jack lift also has a locking pin system that can be deployed, once your bike is in place, to stop the hydraulic foot being accidentally engaged.
The Choice floor jack sits on a solid set of four legs. These are not attached to wheels. They, therefore, offer some extra stability. However, if you need to move the bike around when it’s on the platform, it will prove a little tricky, if not impossible.
- Easy to use hydraulic foot lever.
- Inclusion of two securing hooks.
- Foot lever locking pin.
- Only suitable for bikes with high ground clearance.
- No wheels for easy movement.
Best Motorcycle Lift Table Buying Guide
If you’re working on a small bike weighing less than 300lbs, then any of the motorcycle lift tables in our review should be OK. If you’re working on larger bikes, and particularly big capacity cruisers like Harley’s, the two non-hydraulic lift tables on our list are the way to go.
However, the two non-hydraulic scissor jacks we reviewed have a weight limit of around 1,000lbs; this still might not be enough. Some of the biggest Harley’s are going to weigh much more than this. You need to check the weight of your ride carefully before you buy.
It is worth paying close attention to both minimum and maximum height restrictions.
If the minimum height is quite high, like with the Choice lift table, it will be impossible to wheel under motorcycles that ride low to the ground. Before you buy a lift table, it’s worth checking the underside clearance distance.
More height means more convenience…
The maximum height is also important. If you can safely work on your bike when it’s high in the air, it means that you have to crouch and stoop around a lot less. Just think how hard it is to carry out any sort of maintenance when you have your bike pulled onto its center stand.
The two hydraulic lift tables score well here as they can lift motorcycles as high as 38” off the ground.
Hydraulic jacks take a lot of the physical strain from lifting the table. The two hydraulic lift tables we reviewed are both easy to get into the air. Additionally, the jacks can be operated with a foot lever. This leaves both your hands free to steady your bike if necessary.
The downside of hydraulic jacks is that, for around the same price, they have a much lower weight limit than their non-hydraulic counterparts.
Non-hydraulic jacks take a bit more muscle to operate. The two we reviewed can be raised by using a 7/8” socket wrench. Unfortunately, this is slow and hard going work.
The only real advantage of similarly priced non-hydraulic jacks over hydraulic ones is that they have a higher weight capacity. If you want a hydraulic jack to lift the same kind of weight as a non-hydraulic one, it will cost you substantially more.
Once your motorcycle is in the air, ideally, it should stay in the same place until your work is finished. However, if you’re working in a confined area with limited space, it can be advantageous to have the option of being able to move the stand around.
Having the motorcycle lift table on wheels can allow you to reposition your bike to gain better access. Also, it gives you the option of moving it out of the way to possibly bring in other vehicles. What’s more, it also makes it easier to tuck away for storage.
This is why we believe the best lift table for motorbikes should have wheels. The two alternatives on our list with lockable wheels include either the Extreme Max Hydraulic Jack or the Pyle Scissor Jack.
Looking for something else?
How are your brakes doing? Check out our reviews of the Best Motorcycle Disc Locks and the Best Motorcycle Brake Pads for more information. Finally, keep your engine running smoothly with our reviews of the Best Motor Oils For Motorcycles currently on the market in 2020.
What is the Best Motorcycle Lift Table?
An inexpensive selection of lift tables that will allow you to easily carry out routine maintenance and repairs. They’re all good options, and we hope we’ve proved you don’t need to spend a fortune to make your time in the garage a lot easier.
We think the best all-rounder and therefore the best motorbike lift table on our list is the…
This is because it’s got the highest maximum weight capacity, so it allows you to work on a larger selection of bikes.
It’s also low down to the ground, at its minimum height, and can, therefore, be easily slipped under low riders. Finally, having a set of wheels makes it easy to maneuver around your garage or workspace.
It’s a great little stand and a worthy top pick.
Until next time, keep your rubber on the road.