This article may contain affiliate links. When you purchase through links on our site, we may earn an affiliate commission.
Have you ever faced a situation where your regular jack just won’t slide under a vehicle with lower ground clearance? That leaves you in a tough spot, doesn’t it?
That is where low profile jacks come into the picture. These jacks have low minimum lift height, usually less than 3.5 inches, and can easily lift such vehicles.
But how do you decide which one to buy? Well, we’ve made it much easier for you by reviewing the 10 Best Low Profile Floor Jacks currently available.
So, let’s go through them and find out which is the best Low Profile Floor Jack for you…
- Top 10 Best Low Profile Floor Jack For The Money 2021 Reviews
- 1 Arcan XL2T Black Low Profile Steel Service Jack
- 2 JEGS 80006 Low Profile Aluminum Floor Jack
- 3 Arcan ALJ3T, Aluminum Floor Jack
- 4 Powerbuilt 620479E Xtra Low Profile Floor Jack
- 5 Sunex 6602LP Low Rider Service Jack
- 6 Pittsburgh Heavy Duty Ultra Low Profile Steel Floor Jack
- 7 Pittsburg Low Profile Floor Jack and Jack Stand Set
- 8 Liftmaster Ultra Low Profile Steel Floor Jack
- 9 Pro-Lift F-767 Grey Low Profile Floor Jack
- 10 Neiko Pro 20272B Low Profile Aluminum Floor Jack
- Best Low Profile Floor Jack Buying Guide
- So, What’s The Best Low Profile Floor Jack?
Top 10 Best Low Profile Floor Jack For The Money 2021 Reviews
Let’s take a quick look at their prominent features first.
|(4.3 / 5)|
|(3.9 / 5)|
Arcan ALJ3T, Aluminum Floor Jack
|(4.5 / 5)|
|(3.1 / 5)|
|(4.5 / 5)|
|(4.5 / 5)|
|(4.1 / 5)|
| ||(4.3 / 5)|
|(3.7 / 5)|
|(3.7 / 5)|
Now that we’ve covered the basics, let’s look at each of them in detail—their pros, cons, and key features. So, let’s dive in and review ten of the best low profile floor jacks in detail.
1 Arcan XL2T Black Low Profile Steel Service Jack
This low profile floor jack can handle weights up to 2 ton. And, it can raise the vehicle height from 2.75 inches to 24 inches. The chassis for this one is 32 inches long. The long, low-profile design allows it to enter under vehicles with low ground clearance.
It has a universal joint release mechanism that provides you with precise control. And, it also has dual pumps for rapid lifting.
Moreover, this floor jack adheres to the ASME PALD 2009 regulatory standard.
The product itself weighs 97 pounds and is quite heavy, probably because it has a heavy-duty steel body. However, it does make it difficult to carry around.
2 JEGS 80006 Low Profile Aluminum Floor Jack
This low profile floor jack has a minimum saddle height of 3.5 inches. That combined with a chassis length of 26 inches allows it to reach under vehicles with low ground clearance.
The total height range is 3.5 inches to 19.25 inches. And, the maximum weight capacity is 2 tons.
The saddle on this floor jack can rotate 360 degrees making it easier to use. And, the rubber grip on the lift pad and dual side handles further enhance the ease-of-use for this floor jack.
Moreover, the jack is made of good quality aluminum alloy and is quite sturdy and durable. This product weight is 49 lbs, which is lighter than jacks made of steel. This makes it easy to carry and use.
This floor jack adheres to the ASME PALD 2014 regulatory standard and is safe to use.
3 Arcan ALJ3T, Aluminum Floor Jack
At only 56 lbs, the lightweight design makes it easy to carry and use. And, the two-piece handle makes it easy to store. Moreover, it has dual pistons that allow for rapid lifting and quickly raises the floor jack. And the side-mount handle enables you to position the jack better.
The maximum weight limit for this low profile floor jack is 3 ton, which is higher than several other jacks on this list. This means that it is compatible with a much broader variety of vehicles.
This jack is made with a lightweight aircraft-grade aluminum alloy that gives it enhanced strength and durability. Plus, it has the bypass and overload valves that prevent the hydraulic ram to cross the maximum capacity limit.
The minimum lift height is 3.75 inches, which allows it to be used with vehicles with low ground clearance. And, it can attain a maximum height of 18.1 inches.
…is that this jack complies with the ASME PASE 2014 safety standard and is safe to use.
4 Powerbuilt 620479E Xtra Low Profile Floor Jack
This extra-low profile floor jack is made with high-quality steel and is quite sturdy. It is a quality product that can lift up to 2 tons of weight and is suitable for use in a workshop.
The minimum lift height is 2.75 inches that make it compatible with a wide variety of vehicles, both stock and modified. And, the maximum lift height is 15.25 inches, which provides a flexible height range to this jack.
However, the maximum height is not as much as most other floor jacks on this list.
Moreover, it has a strong steel safety bar that prevents it from lowering after you raise it to the maximum height. This means you don’t have to use a jack stand, even though we always recommend that you do.
This item weighs 60 pounds, making it portable and easy to lift. This is usually not the case with floor jacks made of steel.
This floor jack comes with a one year manufacturer’s warranty and good customer support. And, it is an affordable product, when compared to some of the other floor jacks on this list.
5 Sunex 6602LP Low Rider Service Jack
This low profile floor jack has a minimum saddle height of 2.75 inches. That combined with a chassis length of 36 inches allows it to reach under vehicles with low ground clearance.
The total height range is 2.75 inches to 24 inches, which is quite broad. And, the maximum weight capacity is 2 tons, allowing it to lift cars and SUVs easily.
The product itself weighs 103.6 pounds and is quite heavy, probably because of its heavy-duty steel body. However, it is quite well-built and is sturdy and durable. It also complies with the ASME PALD standards and is safe to use.
One of the best features of this jack is that it allows for rapid lifting. The jack reaches its maximum height of 24 inches in 6.5 pumps. This makes it really fast and convenient to use. Moreover, it has a two-piece handle that gives extra leverage and also makes it easy to store.
This floor jack comes with a one year manufacturer’s warranty and lifetime customer support.
6 Pittsburgh Heavy Duty Ultra Low Profile Steel Floor Jack
This is a comparatively less expensive low profile floor jack that offers decent features. But, the cost does not mean that it is of low quality. In fact, it is a well-built and sturdy jack made with good-quality steel.
The product weight is 79 pounds, which is not that high, especially when compared to other jacks made of steel.
This heavy-duty floor jack can take a weight of up to 3 tons, which is higher than even some of the expensive jacks on this list. It can easily lift heavier vehicles like SUVs and pickup trucks. What’s more, is that its pumps allow it to lift the vehicle rapidly, making it really easy and convenient to use.
The lift height range of 2.88 inches to 19.75 inches also provides enough flexibility to lift different types of vehicles. And, the minimum height of 2.88 inches allows it to slide under vehicles with low ground clearance.
7 Pittsburg Low Profile Floor Jack and Jack Stand Set
This product is exactly the same as the previous one from Pittsburg, but comes with a set of jack stands, in addition to the floor jack.
Since all the details are the same for the jack, there is little point in repeating them.
The jack stands are also made of the same good-quality steel as the jack itself and are sturdy and durable.
The product weight is 89 pounds because it includes jack stands and is made of steel.
8 Liftmaster Ultra Low Profile Steel Floor Jack
This jack provides a minimum lift height of 3 inches and a maximum of 20 inches, giving it a lot of flexibility. And it can lift weights up to 3 tons. Thus, it can be used with a wide range of vehicles with different weights and ground clearance.
It is made with high-quality steel and is strongly built. It weighs 72.8 pounds, which is quite normal for a jack made of steel. And, it’s no trouble to carry it or move it.
The jack comes with a dual pump hydraulic system that allows quick and easy lifting of vehicles. It saves a lot of effort as it helps you attain the maximum height in a fewer number of pumps than most jacks.
Moreover, it has a two-piece knurled steel handle that provides a superior grip. And, it has a foam bumper that ensures that there is no damage to the vehicle.
9 Pro-Lift F-767 Grey Low Profile Floor Jack
This is the most affordable low profile floor jack on this list but still has excellent features. In fact, it can even match some of the expensive jacks in terms of features. This makes it the best value-for-money low profile floor jack on this list.
The minimum lift height is 3.5 inches, which is higher than most other low profile jacks. And the height range of 3.5 inches to 14 inches, which is also not very broad. But, if you need a jack for personal use and this fits the bill, then you really don’t need to look any further.
This jack is made with high-quality steel and is strong and durable. It has a bypass device that prevents it from over-pumping and a safety valve that provides overload protection.
10 Neiko Pro 20272B Low Profile Aluminum Floor Jack
This is a premium product both in terms of quality and price. And, is designed to be a perfect jack for professional use.
This lightweight floor jack (57 pounds) is made with a strong and durable, industrial-grade aluminum alloy. It can withstand rough use and is built to last.
It can lift a maximum weight of 3 tons and has a lift range of 3.75 inches to 19.25 inches. While the maximum height is good, the minimum height is not as low as some other jacks on this list.
It also comes with a built-in safety valve that prevents overloading and provides extra safety. And the swivel rear caster enables it to be better positioned under the vehicles. The handles are dual-sided and are convenient to use and carry.
Moreover, it has dual pumps that allow rapid lifting and can quickly raise the jack to maximum height.
Best Low Profile Floor Jack Buying Guide
There are a lot of features that can help you differentiate one jack from another. Here are some of the key factors to consider when buying a low profile floor jack.
This is the first and foremost factor that you should look at before buying a low profile floor jack. After all, your main purpose is to buy a jack that can slide under vehicles with low ground clearance.
So, minimum lift height is the first parameter to look at while comparing different products. The lower the minimum lift height, the better. Anything less than 3.5 inches should be enough.
Also, a broad lift range makes your jack compatible with a number of vehicles. This is useful if you’re buying a jack for professional use.
This is the maximum amount of weight that a jack can lift. The higher the weight limit, the heavier vehicles a jack can lift.
If you are buying a jack for personal use, then it probably won’t matter much it can lift, as long as it can lift yours. But, for professional use, this becomes an important factor as it allows you to use one jack for multiple vehicles.
Most jacks are made of either steel or aluminum. The aluminum ones are lighter and easy to lift and carry. That makes them more convenient to use. Steel jacks are a bit heavier but are stronger and more durable.
Some jacks use aircraft-grade aluminum, which is lightweight as well as sturdy and durable. This is the best combination which produces a jack that is not too heavy but is also built to last.
All floor jacks should meet ASME or any other regulatory standards.
If a jack does not meet safety requirements, it might break down mid-use and might cause injury or a lot of damage. Thus, you should always check this before buying a jack.
Despite all the claims that a company makes, you never know how well a product will work until you use it. To ensure that you’re not stuck with a substandard or defective product, you should always buy products that come with a warranty.
So, What’s The Best Low Profile Floor Jack?
So, there you have them, some of the best low profile floor jacks currently available. From low-cost products like the Pro-Lift F-767 to premium products like the Neiko Pro 20272B, we have reviewed and compared them all.
For personal use, you can opt for an affordable, yet sturdy, jack that has some basic features. For professional use, you might want to go for the more premium products.
But there has to be a winner, and we decided that the best low profile floor jack is the…
It won because it is strong, robust, versatile and durable, making it a great all-rounder.
But, it’s probably too much for someone who wants something for personal use, in that case, you’ll be better off with the…
The choice is yours, or check out any of the others, they are the best of the best low profile floor jacks after all and select the one that meets your specific requirements.