Riding your ATV in the cold winter months isn’t always the most comfortable experience, but that’s where heated ATV grips can make all the difference. They usually feature multiple levels of temperature control and are easy to install. So, don’t let the cold nights or months ruin your ATV riding experience.
Let’s go through some of our favorites and find the Beat Heated ATV Grips for your needs!
- Beat Heated ATV Grip Comparison Table
- Top 8 Best Heated ATV Grips In 2020 Reviews
- 1 BikeMaster Heated Grips
- 2 Symtec 215047 Heated Push On Grip And Thumb Kit
- 3 Heat Demon 215047 Dual Zone ATV Clamp-On Heated Grip Kit
- 4 Oxford OF692Z Heaterz Premium Sports Heated Handlebar Grips
- 5 Heat Demon 215049 High/Low ATV Clamp-On Heated Grip Kit
- 6 Koso AM111030 Apollo Heated Grips
- 7 Kolpin 50-0360 Hot Thermal Grip
- 8 Western Power Sports Heated Grip – Black
- Best Heated ATV Grip Buying Guide
- So, What Are The Best Heated ATV Grips?
Beat Heated ATV Grip Comparison Table
BikeMaster Heated Grips
|(4.2 / 5)|
|(4.1 / 5)|
|(4.6 / 5)|
|(4.6 / 5)|
|(4.4 / 5)|
Koso AM111030 Apollo Heated Grips
|(5 / 5)|
Kolpin 50-0360 Hot Thermal Grip
|(3.8 / 5)|
|(4 / 5)|
Top 8 Best Heated ATV Grips In 2020 Reviews
1 BikeMaster Heated Grips
These BikeMaster Heated Grips are a very popular option on the market. They have an open-ended design and are manufactured specifically for 7/8 inch handlebars. The textured rubber surface provides a significant amount of grip and is very durable. So, your hands won’t slip while holding on to these heated handlebar grips.
Five-levels of temperature control…
These grips feature an LED indicator that lets you know which of the five temperatures is set. It is easy to read and adjust with the simple touch of a button.
Designed especially for winter use, but even on a fall day, the extra warmth they provide can be a welcome relief. Bikemaster’s heated grips are powered by a 12-volt direct current system and are directly connected to your ATV’s circuitry.
To install, remove your current set of grips, then connect the splicer to a live electrical wire and attach the ground wire to your battery, and your hands will be warm in no time.
- Five different temperature settings.
- Easy to read LED indicators.
- Durable weather-resistant rubber.
- Powered directly through your motorcycle’s wiring.
2 Symtec 215047 Heated Push On Grip And Thumb Kit
Symtec’s Heated Push On Grips are a little more expensive side but are worth it. They feature dual-zone heating and reach your desired temperature very quickly. And they will not only heat your hands but your thumbs as well.
A choice of temperature settings…
This kit includes a dual-channel heat controller allowing you to activate the thumb warmers and grips separately and even have them set to different temperatures. This two-zone controller also has a built-in memory enabling them to remember your previous settings.
Symtec provides you with a choice of plug-ins to perfectly match your ATV, including DC and variable voltage, so compatibility is not an issue.
But there’s a catch…
Sliding these Symtec grips on the handlebars can be tricky. However, after using a bit of hot water to loosen them, it didn’t take too much effort. They stay secured via a clamp style collar that can be tightened with the provided Allen wrench.
Also, the control unit and its plastic mounting bracket aren’t as durable as we would like.
- Dual-zone controller.
- Variable wiring options.
- Quick to heat up.
- Grips are durable and comfortable.
- Not the easiest grips to slide onto the handlebars.
- Durability issues.
3 Heat Demon 215047 Dual Zone ATV Clamp-On Heated Grip Kit
This next set of heated ATV grips is from Heat Demon. And you will notice some similarities between these dual-zone heated handgrips and the previous model reviewed.
Heat Demon’s manufacturing standards are top-notch. We find them to be just as durable as other dual-zone grips, if not more so. And are noticeably slip-resistant, regardless of the humidity levels outside.
Quick as a flash…
The control module is made from plastic and can be installed near the handlebars for easy access. It features five temperature levels. The settings are easy to read and allow for quick adjustments. But one of our favorite features is that the silicone thumb warmer temperature can be adjusted separately from the main grip.
Heat Demon’s ATV grips are made for 7/8 inch handlebars and stay secured by the two clamps provided. Sliding them on was straightforward and didn’t require all that much effort.
Low power requirements…
These dual-zone grips consume a maximum of 45 watts, which shouldn’t drain your battery over time, but they also have an auto shut-off feature. So, if you haven’t used the grips in two hours, they automatically power down, further conserving your ATV’s battery.
They are installed directly into the ATV’s current wiring system using the included cables and adapters. However, the main live wiring cable that powers these grips is somewhat exposed, so you may want to wrap or cover it with weatherproof tubing or tape, for example.
- Soft silicone thumb warmers.
- Installation kit included.
- They only require a maximum of 45 watts of power usage.
- The controlling unit provides five levels of temperature control.
- You will want to weatherproof some of the wirings.
4 Oxford OF692Z Heaterz Premium Sports Heated Handlebar Grips
These Oxfords Premium Heated Handlebar Grips are next up in our review of the Best Heated ATV Grips.
Designed to fit 7/8 inch ATV handlebars, they feature a diamond-patterned textured surface. They are 5.2 inches long but can be trimmed down to fit handlebars as small as 4.8 inches in length if needed. You can choose from five different heat levels, starting at 30% power and going up. The top temperature setting provides 122 degrees Fahrenheit of heat.
Dry as a bone…
You won’t have to worry about water getting into the control unit or wiring of these handgrips. Starting with the welded control unit down to the silicone covered wiring cables, you can rest assured that no matter the weather, this set is made to be durable and long-lasting.
We also want to note that the wiring coming from the heated grip is angled downward towards the ATV. This will increase durability since water or ice will slide right off of them.
Installations couldn’t be more simple with the plug and play style connectors Oxford has used. From the control unit to the two ring connectors that attach to the battery, everything can also be neatly secured via the inclosed tie cables and glue.
In case you forget to power down your heated grips after a ride, the control switch features low voltage protection. Therefore, if your ATV battery drops to 10.5 volts, the switch will automatically cut the power to preserve the battery.
- Waterproof cables and controller.
- Incredibly easy installation.
- Grippy diamond threaded pattern.
- Low-voltage protection protects your battery.
- The mounting for the control unit could be more durable.
5 Heat Demon 215049 High/Low ATV Clamp-On Heated Grip Kit
These clamp-on style heated grips are easily adjustable through a rocker style switch, that gives a choice between high, or low power modes, or simply off. Each grip requires 20 watts of power at max to operate. Even though the grips are minimalistic in design, they provide an adequate amount of heat and will warm your hands nicely on a cold winter night.
You should be able to slide these grips on your handlebars reasonably easy because they are compatible with any 7/8 inch handlebar. You then simply tighten the clamps down with a flat head screwdriver. Special tools are not needed.
Tuck them away…
The wiring cables Heat Demon provides are not waterproof. They are slim, though, and can be tucked away under your ATV’s panels. However, we would recommend covering the wiring in rubber to increase the durability over time.
Also note that both the ground and power wires are red, which could cause some confusion. To avoid draining your battery, you will want to make sure they are grounded directly to the battery and not the frame of your ATV.
- Minimalistic design.
- Only takes 40 watts of power to operate.
- Compatible with all 7/8 inch handlebars.
- Only three levels of power.
6 Koso AM111030 Apollo Heated Grips
Koso has streamlined these grips by having the controller integrated into the grip itself. And remember that whether you are going slow or fast, for safety sake, you should always have your hands on the handlebars, and these Koso heat grips allow you to do that.
The right grip fits a 1-inch handlebar that uses a twist type throttle system while the left grip is for a 7/8 inch handlebar. This isn’t uncommon, but make sure that your ATV has the same size handlebars.
Easy to use…
These heated grips have five different temperature settings to choose from. Koso uses a multi-colored led indicator located on the left handgrip to let you know which temperature setting you are currently on. It is super easy to change the temperature level with your thumb and keep complete contact with the handlebar at the same time.
These feel pretty much like your standard stock grips on the outside. The inside of the grip is a hard plastic that will not stretch. When installing these grips, you will find that you may need to use a strong adhesive to make sure they stay in place. And attaching the wiring to your battery is pretty straightforward, as you are provided with a simple plug and play type system.
A bit on the short side…
The cables are nice and thin, which makes it easy to tuck them away under your panels. We do think that the wires could be a bit longer, though.
Koso has built-in a low voltage battery protection system in these grips. Like other heated grips, if your ATV’s battery level drops too low, these grips will automatically shut off. You won’t need to worry about not having enough juice left to restart your ATV.
They warm up in no time at all once set up and also feel nice and sticky, so you won’t need to worry about your hands slipping. Koso’s Apollo grips are a serious contender among the Best Heated ATV Grips currently on the market.
- Integrated controller.
- Five level LED indicator.
- Stock like feel.
- Plug and play type installation.
- The installation wiring could be longer.
7 Kolpin 50-0360 Hot Thermal Grip
The Kolpin 50-0360 features two different heat levels. This may not sound like a lot and is a lot less than most of its competitors, but you will be surprised at how well they work with only a high and low setting.
As long as your handlebars are 7/8 inch in size, these will fit. And the manufacturer recommends a slow setting epoxy to secure these nicely to your handlebars.
Extremely tight fit…
However, we found that we needed a mallet to get them entirely on. The fit is very tight to the handlebars, so once in place, they are going to stay put.
The control unit is small and round. You should be able to fit this directly on your handlebars allowing for easy adjustment without taking your eyes off the road for long. You will find wiring these grips to your battery very easy since everything is fully assembled out of the box, simply hook the ground and live wires up to your battery and you are set.
No auto shut-off…
These do not have an auto shut off feature. You will want to remember to shut them off after use unless you have the grips wired to a live connection that is only active while the ATV is running.
On the high setting, they draw 2.57 amps and 0.68 amps on low and feature a 3 amp fuse. They arent that power-hungry, but its always wise to make sure your battery doesn’t get too low on power for obvious reasons.
- Handlebar-mounted switch.
- Two levels of heat adjustment.
- Wiring comes preassembled.
- They fit very tight and might need extra tools to get on your handlebars.
8 Western Power Sports Heated Grip – Black
The last set of heated grips we love is from Western Power Sports. These heated grips fit 7/8 inch bars as well, including ATV’s with a thumb style throttle. The quality of rubber used in these grips is very durable. And they slide onto your handlebars reasonably easily because of the flexible but grippy rubber that they are made from.
Therefore, when it starts getting warm out, removing these and replacing them for your stock grips won’t be to much trouble at all.
A bit slow…
We found these grips to be more suitable for longer rides. They feature two levels of heat control and get more than warm enough, but they don’t rise to temperature very quickly. You can adjust the temp with the control unit that is sealed to prevent any water from getting in. And a quality mounting bracket is provided that holds the controller in place even over extremely bumpy terrain.
They are easy enough to install, and the wiring is long enough, so you shouldn’t need any type of wiring extenders. And once you turned off your ATV, these shut off as well, as long as have wired them to the ‘On’ position of your ignition, so you won’t need to worry about your battery draining.
Careful with the install…
These grips are durable, but you need to be a bit wary of twisting them too much when installing them. The heating elements could be potentially damaged, so gently does it.
- Two levels of heating.
- Easy to install and remove.
- Work perfectly with thumb style throttles.
- The heating elements aren’t the quickest to come to temp.
Best Heated ATV Grip Buying Guide
Heated ATV grips are usually made from rubber, which is excellent in not only extending the life span of your grips but also giving a sticky surface for your hands to stay firmly glued to.
Dual-zone heated grips usually feature silicone thumb warmers. Silicone is extremely durable as well and can last up to four times longer than rubber.
Heated ATV grips can feature multiple levels of temperature control. This allows for high customization and will lead to warm hands no matter what the weather is like. The heat control units are usually square, round, or integrated into the handlebars themselves. You should be able to mount the different types to your ATV without taking up to much room.
The square controlling modules are usually the biggest, though, but they come with their own benefits. You will often find these on dual-zone type heating grips that provide heat to not just the grip but also your thumbs as well.
Small circular style control units commonly provide you with fewer levels of adjustment, typically two – high or low. This makes them super easy to adjust while riding. Also, given their small size, they can usually be mounted directly on to the handlebars themselves.
Integrated controls are great for safety reasons. You won’t have to worry about taking your eyes off the trail since these types of grips can be adjusted with your thumb. They can normally provide you up to five different levels of heat that should get you through some severely cold weather.
Installation And Weatherproofing
Most heated handgrips come with all the tools you need in the box to be installed. ATV handlebars are most commonly 7/8 inch in size, so it is common to find grip manufacturers selling the same size.
When removing your stock grips, you will usually need a box cutter, or something similar, to strip away the original grips.
If you have a compressed air gun, you can usually remove your stock grips by blowing air into them from the side. This will actually push the grips away from your handlebars while doing the least amount of damage to them.
The wiring provided with the grips doesn’t always feature waterproof connectors or even cabling. Fortunately, you can secure the installation underneath your ATV’s panels to provide extra protection. However, we still recommend using heat shrink tubing or waterproof tape as well to be on the safe side.
Some models will have some protection from draining your battery. The most common way is that the control unit automatically cuts power to the grips if your batteries voltage gets low.
If you wire your heated grips so that they only turn on when you have the key to the ‘On’ position, is one of the easiest ways to prevent battery drain. This will automatically kill the power to them when not in use. Lastly, if you ground your wiring directly to the battery, you won’t have to worry about any power leakage as well.
Depending on what exactly you use your ATV for, there are some other great accessories that you may want to add. If so, please check out our reviews of the Best ATV Snow Plow, the Best ATV Ramps, the Best ATV Winch, the Best ATV LED Light Bar, and the Best ATV Sprayers currently available.