This article may contain affiliate links. When you purchase through links on our site, we may earn an affiliate commission.
Come on, guys and girls, stop leaning your bike against a wall, show it some love. Buy yourself a bike rack. You might just save yourself some space and as well as some potential damage.
The good news is that even the best bike racks don’t need to cost a lot. Some of the more affordable ones can cost even less than a couple of coffees and a piece of cake.
So, tell your bike you love it, and check out these 10 bike racks. Hopefully, there’s one amongst them that’s the right fit for your home, or garage, and bike.
- Top 10 Best Bike Racks On The Market 2022 Reviews
- 1 Delta Cycle Michelangelo
- 2 Steadyrack Classic Bike Rack
- 3 CyclingDeal 2-4 Bike Bicycle Vertical Hanger Parking Rack
- 4 Feedback Sports RAKK Bicycle Storage Stand
- 5 Racor – PBH-1R, Bike Storage, Garage Pulley Lift
- 6 Ibera Horizontal Bicycle Bike Wall Hanger
- 7 Racor – B-1R, Bike Rack, Garage Wall Mounted
- 8 CLUG Bike Clip Indoor Outdoor Roadie Bicycle Rack Storage System
- 9 Delta Cycle Leonardo Da Vinci Single Bike Storage Rack Hook Hanger
- 10 Dirza Bike Rack Garage Wall Mount Bike Hanger
- Best Bike Racks Buying Guide
- Before You Go
- Final Thoughts On The Best Bike Racks
Top 10 Best Bike Racks On The Market 2022 Reviews
1 Delta Cycle Michelangelo
The Delta Cycle Michelangelo stand is perfect where space is at a premium.
The stand measures 84 x 20 x 16 inches. It has a load capacity of up to 35 kgs and can hold two bikes. 35kgs might seem like a lot, but you could quickly exceed this limit. If you have road bikes, you’ll be fine. However, if you have a couple of cruisers or heavier mountain bikes, you might come close to this limit.
The Delta Cycle Michelangelo stand is easy to assemble, and other than a hex key, you don’t need any specialist tools. You can realistically expect to assemble it in minutes.
More good news is that there’s no drilling into the walls. Once the frame has been put together, you simply lean the top end of the frame against the wall. The rubber feet and gravity will take care of the rest.
If you use the bike stand in the house, there’s no need to worry about damaging any internal paintwork, as it has rubber bumpers to prevent any damage.
This means that regardless of the size of your bikes, they’ll be easily accommodated. Additionally, you don’t need to worry about scratching the paintwork on your bike’s frame as the arms are fully padded.
The bike rack has a powder-coated frame that is hard-wearing and stylish. Despite the low price, it’s a nice looking and elegant way to store your bikes in a confined space. The rack is equally at home in a garage or a hallway. It can be used with hard floors or carpeted surfaces.
- Easy to assemble.
- No drilling required.
- Can hold two bikes.
- Looks elegant.
- Low weight limit.
2 Steadyrack Classic Bike Rack
The Steadyrack Classic Bike Rack is one of four in their series of bike racks.
The Classic can hold bikes up to a maximum weight of 77lbs. It can hold bikes with tire widths up to 2.4 inches. Additionally, it can hold bikes with tire diameters of between 20 to 29 inches.
If you have a bike with fenders, a mountain bike, or a fat bike, be sure to check the rest of their range. Steadyrack will have a rack for your bike. Just be sure to do a bit of quick research to ensure you get the right one.
The Steadyrack Classic Bike Rack comes in 2 parts. The larger top half has a frame to hold your front wheel. The lower half has a small plastic holder to secure your rear wheel. Both parts of the rack need to be secured to the wall, so some drilling is required.
Putting your bikes into the rack is easy. One of the benefits of this rack is that you don’t need to lift your bike onto it. You simply put your bike on its back wheel and push the front wheel into the rack.
Once you have the front wheel locked in place, you can then choose the angle at which you want to store your bike. You can either store the bike perpendicular to the wall. Alternatively, by placing the rear wheel to the right or left of the plastic holder, you can angle the bike away from the wall.
However, the profile will not be as low as bike racks that are fixed parallel to the wall. For this reason, we think this kind of system is better suited where space is not quite so tight. The Steadyrack Classic Bike Rack is, therefore, more likely to find a home in the garage rather than a hallway.
- No lifting required to place the bike on the rack.
- Bike can be positioned at different angles to the wall.
- Total weight capacity of 77lbs.
- Very stable.
- Takes up more space than parallel mounted racks.
3 CyclingDeal 2-4 Bike Bicycle Vertical Hanger Parking Rack
This is a sturdy two bike storage rack. It stands 86 inches tall and can hold two bikes up to a limit of 110lbs. That should reasonably cover just about any combination of bikes you can think of.
CyclingDeal recommends that you put the heaviest bike on the bottom bracket, which seems to be common sense. It can accommodate all makes of bikes. However, some women’s bikes, and mountain bikes with dual suspension, will need a special adaptor.
The adaptor is not included, which is a shame. These kinds of bikes are hardly unusual. Surely, it’s not too much to ask to have an adaptor included as standard?
However, the system doesn’t have as much range of adjustment as the Delta Cycle Michelangelo bike rack. Also, since you have to use a hex key every time you alter the height, it’s not as easy to do.
Tilt is easier to adjust than height and is very useful for a lot of different bikes. The cradles are designed to fit the geometry of any bike, including aero bikes. The cradle arms have quite a thin kind of padding though it is more than adequate to protect the paintwork of your bike.
The frame is easy to assemble and doesn’t require you to drill any holes in the wall. The frame also stands clear of walls once it’s erected. Once in place, the base of the frame has a very large profile and ensures that your bikes remain rock steady, once loaded.
- Heavy load capacity.
- Stores 2 bikes.
- Tilting cradles.
- Limited height adjustability for the cradles.
4 Feedback Sports RAKK Bicycle Storage Stand
You’ll see this kind of bike rack just about everywhere.
This is an inexpensive and easy way to store your bike. One of the great things about these racks is that there is no weight limit. The only limiting factor is tire width. Otherwise, the Feedback Sports RAKK will take any shape or size of bike, with a tire width of 2.4 inches or less.
You operate the rack by wheeling your bike into the rack by either the front or rear wheel. The cool thing is there’s no lifting involved. Just push your bike in and let the spring-loaded arm take care of the rest.
Because the rack only comes into contact with your wheel, you don’t run the risk of damaging your frame or your wheel and spokes. There’s also no danger of the stand falling over, so this is one of the safest and most stable systems you can buy.
The Feedback Sports RAKK does differentiate itself from the opposition through its modular design. If you have more than one bike, and most of us do, you can join the racks together. This provides you with perfect spacing between your bikes.
One of the only drawbacks of this kind of bike rack is that you do require more space to store your bike or bikes than a lot of alternative racks. This is not a space-saving system and is not the kind of rack you’d likely buy for storing your bike anywhere inside a house or apartment.
This rack is most likely to find a home and some love inside a garage. Since statistically speaking, this is where most people keep their bikes; it makes a lot of sense. It also explains the design’s enduring popularity.
- Does not damage the paintwork or wheels.
- No lifting required.
- No installation required.
- Easy to transport.
- Not space-saving.
5 Racor – PBH-1R, Bike Storage, Garage Pulley Lift
This looks and sounds like some kind of torture device.
The Racor – PBH-1R, Bike Storage, Garage Pulley Lift has been designed with the garage in mind. However, we think there are plenty of other places it could be used. We think you’ll agree that this would be great in an apartment or house with a high ceiling that’s also restricted for space.
The pulley is then secured to the wall. The two claws attached to the pulleys fit under the saddle and front forks.
When you want to store your bike, you simply lower the pulley, hook your bike on to the claws, and raise the bike into the air. To retrieve your bike, follow the reverse process.
This is plenty. The pulley can be used to lift your bike 12 feet in the air. It’s not difficult to use, and the gearing system on the pulley effectively reduces the weight by eight times. This means it’s almost effortless to raise and lower.
The great thing about this rack is that it requires zero floor space. If you have limited space, this is perfect for freeing up your floor area. For this kind of rack, it’s very much a case of, the higher the ceiling, the better.
- Frees up both walls and floors.
- Accommodates all shapes of bikes.
- Easy to raise and lower.
- 50lbs weight limit.
- Requires drilling for installation.
6 Ibera Horizontal Bicycle Bike Wall Hanger
The Ibera Horizontal Bicycle Bike Wall Hanger is screwed into the wall. It’s easy to install, but you will need secure anchoring points. You’ll need to drills holes and screw the mounting plate to something like masonry, concrete, or wood. Do not try to fix the mounting plate into a plasterboard wall. It will not be able to support the weight of your bike.
The Ibera Bike rack can store bikes to a maximum weight capacity of just under 40lbs. It will also store any frame with a width of just over 2 inches. This should be fine for most bikes.
The bike rack has an adjustable beam that can be extended between 8.5 inches to 12 inches. This is to accommodate different length handlebars. It means that for bikes with narrow handlebars, you get to store it closer to the wall to free up more space.
This means you’re able to keep your bike wheels horizontal to the ground. Both the holders are foam-padded to prevent any scratching to your paintwork.
Once you’ve loaded the bike onto the rack, there is a Velcro strap provided to tie up the front wheel. This prevents it from swinging into the wall and potentially leaving an unwanted muddy or dirty mark. We’re sure you’ll agree this is something none of us want to see.
The Velcro strap works well, but the truth is it is a bit fiddly having to tie your wheel every time you put it into the rack. Furthermore, depending on how high you secure the rack, it can be awkward to lift and load your bike, without making contact with the wall.
All in all, this is an inexpensive and simple rack that’s perfect for the hall or garage wall.
- Adjustable arms for angle.
- Length adjustable beam.
- Can hold 40lb bikes.
- Awkward to load.
7 Racor – B-1R, Bike Rack, Garage Wall Mounted
This is a space-saving, inexpensive and simple design.
The Rancor B-1R works by holding the front wheel by a rubber-coated hook.
The plate screws into the wall and comes with mounting screws provided. The mounting plate should only be screwed into a solid wall of brick or concrete. Since this is designed primarily for a garage, that shouldn’t be too much of a problem.
The rack should hold bikes up to a maximum of 50lbs. Whilst we don’t dispute this, we think that it’s worthwhile changing out the mounting screws for a bit of extra strength. In our opinion, they’re too short. Dig in your toolbox and fish out something longer.
The Racor bike rack will take any style of bike, but the hook does restrict you to wheel size. Any bike with wheels over 2.25 inches won’t fit. On a more positive note, the rubber-coated hook won’t damage your wheel.
Never the less, the rubber coating on the hook is liable to wear quite quickly. You need to keep an eye on it, and unfortunately, you might be forced to add your own padding to the hook at some point. It’s a bodge that could be avoided if the padding was made with better quality materials.
In a garage with a brick or concrete wall, this is likely to be of little consequence. It’s made for garages anyway. However, if you’re thinking about mounting it anywhere inside your house or apartment, it’s something you should carefully consider.
- Can be used with any kind of bike.
- The load capacity is 50lbs.
- Poor quality rubber padding.
- Fixing screws are too short.
8 CLUG Bike Clip Indoor Outdoor Roadie Bicycle Rack Storage System
The CLUG Bike Clip is a similar kind of design to the Racor – B-1R, but it’s better executed.
Sometimes simple ideas are the best, and we think this very much holds true for the CLUG Bike Clip.
The clip is screwed into the wall and holds the bike by the front wheel. Unlike the Racor – B-1R, the Clug holds the front wheel by the tire, and the rear wheel touches the ground to support the majority of the bike’s weight.
The only point of contact between the Clug and the bike is on the tire. This effectively eliminates any possibility of damaging the wheel, spokes, or frame.
The Clug needs to be screwed into the wall. Like any of these kinds of racks, just be sure you’re screwing it into something solid. Don’t fix it into a plasterboard wall.
The advertising shows a cool looking guy coming into an equally cool looking office and pushing the bike into the rack. It’s all so, so cool. Probably not so cool though on a rainy day when his bike is covered in mud and oil. I have a feeling his boss may then have something to say about the ruined, burnt orange paintwork.
It’s another bike rack that belongs either outside or in the garage.
Because the rear seat rests on the ground, this is pretty much a bike-specific rack. Before fixing it to the wall, carefully measure the height to ensure the front wheel will fit in the Clug whilst the back wheel is touching the ground.
Note, this will not fit all wheel sizes, and there are five different Clug sizes available. These go from small to XXL. They cover all wheel sizes between 1 inch to 3.2 inches.
One great thing about the Clug is that since the rear wheel keeps contact with the ground, you can simply wheel your bike into position. There’s no lifting required. Always a good thing in our book.
- Easy to install.
- Does not come into contact with the wheel or frame.
- No lifting required.
- Not suitable for indoors.
9 Delta Cycle Leonardo Da Vinci Single Bike Storage Rack Hook Hanger
The Delta Cycle Leonardo Da Vinci Single Bike Storage Rack is another rack destined for the garage.
This is another bike rack with a plate that screws into the wall and an arm that hooks and holds the front wheel. Like the Racor and the Clug, you’ll need a solid wall to drill and fix it to. Unlike the Racor and like the Clug you get decent sized fixings and screws to do the job.
The Delta Cycle Leonardo Da Vinci Single Bike Storage Rack advertises itself as being suitable for any wheel size. However, any bike with a wheel over 2.5 inches wide becomes difficult to maneuver into place. A wheel over 3 inches wide becomes almost impossible. If you’ve got a fat bike, we’d honesty advise you against buying one.
The padding on the arm is better than the one on the Racor. It’s more substantial and made from a better grade of material. This is much more likely to be able to stand the test of time.
For the least expensive of all the bike racks we’ve reviewed, the Delta bike rack does a pretty good job. However, it’s not only one of the best bike racks for value, but it’s also one of the best bike racks for practicality too.
The Delta bike rack, and included in the already low price, also comes with a tire tray. This is fixed to the wall and allows the rear tire to rest into it. It’s a simple idea and is a great solution to preventing muddy and dirty marks on the wall.
With Delta’s tray, you can consider bringing it inside. It should still be noted that the system is still far from perfect. The truth is that all these kinds of racks can be hard to load and can still potentially leave marks on your wall. However, at least with the Delta rack, you have a chance of getting an affordable and useable bike rack into your apartment.
- It can be used indoors.
- Suitable for any kind of bike.
- It can be difficult to load.
10 Dirza Bike Rack Garage Wall Mount Bike Hanger
This is Dirza’s take on a plate mounted wheel hook bike rack.
This is the largest of the plated mounted racks. It is 10 inches in length and measures 2.5 inches at its widest point. It measures 1.75 inches at its narrowest.
It is fixed onto the wall with four good sized screws that are provided. It should be mounted into something solid like brick, stone, or cement. Since this is another garage rack, that should be easy enough.
The Dirza rack has a maximum capacity of 65lbs, which we’re sure you’ll agree is more than adequate. The bike rack will take any shape or model of bike with a tire width up to 2.5 inches. Anything over this and you’re out of luck. There’s no way you’d be able to store your fat bike in one of these.
It’s well-padded and is made out of some good quality rubber. We have some confidence that this will have a decent amount of longevity.
We found the Dirza rack to be the easiest to use compared to other similar rack systems. The hook was less fiddly to pull over and secure the wheel — a big plus for us.
Dirza back their product with a lifetime guarantee, so there’s no way you can lose. They claim it’s built to last, so why not hold them to their claim. Give them a ring in ten years or so, when the rubber perishes, and get another one. That could be a lot of fun!
- Well built.
- High maximum weight capacity.
- Easy to use.
- Good fixings.
- Lifetime warranty.
- Not suitable for use inside.
Also see: Top 6 Best Pop Up Camper Bike Racks
Best Bike Racks Buying Guide
Bike racks for the home or garage are used as space-saving devices, a way to keep your bikes safe, and sometimes a bit of both.
If you live in a small house or apartment or have limited room in your garage, a well-designed bike rack can potentially free up a lot of space. There is a good selection of wall-mounted and floor mounted bike racks that are ideal for use in hallways or cluttered garages.
A lot of us have bikes that hold great sentimental value. A few of us also have some rather expensive bikes. Not using a bike rack, and simply leaning your bike against a wall or piece of furniture, is asking for trouble. If it falls over you, run the risk of damaging the paintwork or your crankset. An inexpensive bike rack can save you a lot of trouble and expense.
There is one more reason people use bike racks. Cyclists with a really special bike may choose to exhibit it like the beautiful piece of art it is. A bit like having glass windows from your living room to your garage to show off your Ferrari.
We think hanging your bike on the living room wall is a great idea. Sadly, our wives, girlfriends, and significant others don’t seem to share this same kind of artistic appreciation.
Horizontal Floor Racks
Horizontal floor racks are frequently designed to hold two bikes though it’s not unusual for them to hold four.
They are one of the most space-efficient kinds of bike racks. They’re ideal for narrow hallways or rooms in apartments with limited floor space.
The Delta Cycle Michelangelo and the CyclingDeal bike racks are both great horizontal racks. They’re both stylish and easy to assemble without the need for drilling holes into walls.
The only downside of these racks is that you have to physically lift your bikes to place them on the rack. This is not so bad for the lower bike. However, lifting the second bike high into the air can be tricky. It can get your arms shaking too if you don’t get it right after a couple of goes!
If you don’t have arms like The Rock and you have plenty of space, floor bike racks are hard to beat.
There’s no doubt that floor racks are the easiest to put your bikes into. You simply wheel them in, and you’re done. They’re also great as there is no weight restriction and they can be used with any bike. The only bikes that won’t fit are those with wheels more than 2.5 inches wide.
If you have space, we’d choose these, like the Feedback Sports RAKK, every time.
They’re also relatively inexpensive, which is another nice bonus.
Ceiling Pully Racks
Having a bike stored on a ceiling pulley rack introduces a touch of theatre every time you take it down for your ride. There’s something quirky and fun about these bike racks. If you have a high ceiling with limited space, they could be the perfect bike storage solution.
Just be sure the bike is stored where someone is not going to bang into it with their head. Bashing onto a dangling pedal is a painful experience. We know!
Wall Mounted Racks
Wall-mounted racks take up less space than floor racks but more space than horizontal racks. They’re a cheap, easy way to store your bike or bikes. However, you will have to get handy with the drill to attach the mounting plate to the wall.
One of the issues with these systems is that they leave the rear wheel in contact with the wall. Not a great idea on a nicely painted wall inside your house or apartment. This is more so after you’ve been for a wet or muddy ride.
Despite these rack’s shortcomings, there is one bike rack that has gone a long way to overcoming this problem. The Delta Cycle Leonardo Da Vinci has a separate tire tray that keeps the dirty rear tire away from your wall. Nice idea, guys.
Before You Go
For more great reviews of the best bike accessories, bike parts and upgrades, check out our comprehensive reviews for the Best Bike Rollers, the Best Bike Tubes, the Best Bicycle Pumps, the Best Bicycle Tire Pressure Gauges, the Best Bicycle GPS Trackers, the Best Manual Tire Changers, the Best Bicycle Seats, the Best Flat Pedals, and the Best Bicycle Tool Kits currently available.
Right, back to bike racks…
Final Thoughts On The Best Bike Racks
So, there you have it — 10 different but effective ways to store your bikes.
Where space is not at a premium, we like the idea of a floor-standing rack for its basic simplicity. This is why the…Feedback Sports RAKK…is our top pick.
The Feedback Sports RAKK is inexpensive, and it’s the only bike rack on our list that requires zero fixings or installation. It’s easy to move around, it can be used in a modular fashion, it’s suitable for a wide range of bikes, and it doesn’t damage your bike’s paintwork.
The coolest thing though, is that there’s no lifting involved to put your bike in the rack. That’s something we like. That’s something we can really get behind.
Enjoy your bikes, and enjoy your rides.
And take care of your bike!