Ball joints are like the knees of your vehicle. Most days you don’t even realize they are there as you move from one place or another. However, when they start to get some age and wear on them, you really start to notice them and not in a good way. If they go out on you, you won’t be moving anywhere at all.
Where can you get new ball joints and which brands can you trust?
We have a review of the top 7 best ball joints for you, along with a buyer’s guide to help you answer that question.
- Top 7 Best Ball Joints For The Money 2020 Reviews
- 1 Moog K8607T Ball Joint – Trusted Innovation
- 2 Detroit Axle 14-Piece Front Suspension Kit – Yukon Kit
- 3 EPI Standard Ball Joint Kit – Ball Joint for Polaris Vehicles
- 4 Moog K80026 Ball Joint – Uppers to match the lowers
- 5 ACDelco 46D2281A – The Durable Advantage
- 6 Synergy Manufacturing – For the Jeep that Stays in
- 7 PartsW 4 Piece Suspension Kit – For the Conservative Jeep
- Best Ball Joints Buyer’s Guide
Top 7 Best Ball Joints For The Money 2020 Reviews
1 Moog K8607T Ball Joint – Trusted Innovation
Moog is a trusted brand in ball joints. Their Problem Solver Team has come up with some special design implementations with the K8607T Ball Joint to help your 1992-1996 Dodge and Ford vehicles steer well.
First, they have a gusher bearing that allows you to grease the ball joint pieces. It is set in a one-piece, oversized housing that will enable you also to flush out contaminants that wear down your ball joint. It also provides 36 degrees of movement in hardened steel that can withstand the pressure of your driving conditions.
The one complaint the reviews have made about this ball joint is that they sometimes have trouble with the grease fitting. The engineering is good, but it has issues in some vehicles. Other than that, this is undoubtedly one of the best ball joints.
2 Detroit Axle 14-Piece Front Suspension Kit – Yukon Kit
Here is a front suspension kit for the 2000 Yukon 5.7L. It contains 4 ball joints, 4 lower control arms, 2 front stabilizer sway bar end links and 4 tied rod end links. It is a complete package. In fact, you may end up with spare parts.
The ball joints are good. Unfortunately, the tie rod and sleeve are not the best quality. If you only need the best ball joints, you may save money going with a model that does not include the whole kit.
3 EPI Standard Ball Joint Kit – Ball Joint for Polaris Vehicles
Let’s face it. All ball joints are not equal and are not made the same. The best ball joints for you will not fit another make and model.
The EPI Standard Ball Joint Kits are the best ball joints if you have a Polaris model. It fits a wide variety of makes including the ACE, ATP, Diesel, Magnum, Ranger, Scrambler, and Sportsman. If you have a Polaris, you won’t go wrong with this ball joint kit.
It is high quality and has many happy reviewers rating this as the best ball joint kit for Polaris vehicles.
4 Moog K80026 Ball Joint – Uppers to match the lowers
The Moog K80026 Ball Joint is nearly identical to the K8607T listed above among the best ball joints. What is the difference between the two? These are the upper ball joints. The K8607T are the lower ball joints.
Moog is a very trusted company. In fact, they are the official suspension company for NASCAR. While customers have complained about third party retailers shipping them wrong parts, there has only been one complaint about Moog and their products.
The grease fittings sometimes have problems. Not in every case, mind you, but in enough instances that Moog should be taking note. We are, in any case.
5 ACDelco 46D2281A – The Durable Advantage
These ACDelco’s are front lower ball joints for most GM and some non-GM vehicles. They are built for durability and are coated to protect them from corrosion in everything you may drive through.
The ACDelco ball joints are some of the best ball joints because they are forged and fatigue tested to ensure that durability under extreme impact, and wear.
What are the setbacks with these ball joints? They fit some, but not all F-150s, and you have to do a little bit of digging to find which ones. Also, the instructions for installation are not the best, causing headaches for the novice and non-mechanic out there.
6 Synergy Manufacturing – For the Jeep that Stays in
This is a somewhat sad review of what should be an excellent product. The Synergy Manufacturing ball joint kit provides 2 upper and 2 lower ball joints for your Jeep. It is a little pricy, but it is a complete kit. These ball joints were explicitly designed to replace the factory models that struggle when paired with off-road tires.
Jeeps are off-road vehicles, so this strategy makes perfect sense. The problem is, it doesn’t work well. It is advertised as outperforming the factory model, which gives us a lot of concern for that model as well.
The reviews state that this ball joint wears out with virtually any amount of off-roading experience, far faster than it should.
So, if you want to keep your Jeep inside the garage, this is the best ball joint for you. If not, you may find you can spend your money better elsewhere.
7 PartsW 4 Piece Suspension Kit – For the Conservative Jeep
If Jeep could get the Problem Solvers over at Moog to come to help them with suspension, they would really have the best ball joints for these off-roading animals.
While we wait for that day, PartsW has supplied one of the best ball joints and suspension kits for Jeep Cherokee, Comanche, Grand Cherokee, Grand Wagoneer, TJ, Wagoneer, and Wrangler.
The technology is all there in these ball joints, but the reviewers share that the quality of the product is below the standards of other brands. Furthermore, it has problems fitting all the vehicles their customers expect them to fit.
Best Ball Joints Buyer’s Guide
Before going into specific categories of value for ball joints, it is worth mentioning again that best ball joints for you are going to be ones that fit your make and model. It does you no good looking at reviews for Ford-specific vehicle ball joints if you drive a Toyota. The first step is to find one of the reviews that match your vehicle.
When it comes to quality, nobody does it with the trust, innovation, and consistency of Moog. Whether you are looking for upper or lower ball joints, Moog supplies the needs for Ford vehicles listed above and are worth checking into for ball joints for other models as well. It is not by accident that they are the top brand and best ball joints used by NASCAR.
Some of these ball joints contain the ball joint alone, and others are kits. These kits include tie rod ends to make sure your ball joint works well with your steering suspension. While these can be helpful, sometimes these are not necessary. It also increases the price of the kit overall, potentially leaving you with parts you paid for but did not need.
The EPI, ACDelco, and Detroit Axle kit especially come with extra pieces you may not need. Additionally, the companies often cut corners in quality in these kits, providing you more pieces but made with the lesser quality overall. However, if you are looking for ends and arms that you can be sure will match your ball joint, these kits are the best ball joints for you to purchase.
None of these ball joints are universal. The EPI, made for Polaris models is very flexible within that model, but not outside of it. Likewise, the Detroit Axle ball joint kit is only for the Yukon model vehicles. The Synergy Manufacturing and PartsW both work on Jeep models but have lower quality hardware, which is unfortunate for Jeep owners.
Probably the least adaptable model is the ACDelco model. They are very durable, but only fit a small range of Ford F-150 models. The Moog ball joints offer some of the best amounts of flexibility, serving both Dodge and Ford vehicles, according to the reviews.