This article may contain affiliate links. When you purchase through links on our site, we may earn an affiliate commission.
The floor jack is one of the most common tools you will see in a motor repair shop. And in many cases, in people’s own garages at home. It is lighter than some of the alternatives and easier to move into position. However, it is important to ensure that the jack you buy to lift 3 tonnes is up to the job.
That is why you need one of the Best 3 Ton Floor Jacks currently available. They are built to be low to the ground, have a long handle and four wheels. The handle is used to pump the hydraulics of the jack.
For safety reasons, a floor jack should never be relied on to support a vehicle’s weight totally. They are excellent lifting devices, but a leaky seal on the hydraulics, poor placement of the jack, or other issues could bring the vehicle down. Being underneath it at the time is not a good place to be. Use the jack to get the vehicle in the air and then support it with approved ramps and/or jack stands.
So, what’s on offer for 3-ton floor jacks? Let us take a look and find the perfect one for you…
- Top 5 Best 3 Ton Floor Jacks On The Market Reviews
- 1 Arcan 3-Ton Quick Rise Aluminum Floor Jack – Best Mid-Range 3 Ton Floor Jack
- 2 Blackhawk B6350 Fast Lift Service Jack – 3.5 Ton Capacity – Best Budget 3 Ton Floor Jack
- 3 Neiko Pro 20272B Premium Low Profile Aluminum Floor Jack – Best Value for the Money 3 Ton Floor Jack
- 4 NOS NSJ0301 3-Ton Aluminum Service Jack – Best Premium 3 Ton Floor Jack
- 5 Liftmaster 3 Ton Aluminum and Steel Low Profile High Lift Floor Jack – Best 3 Ton Low Profile Floor Jack
- Best 3 Ton Floor Jacks Buying Guide
- Looking for more superb jack options?
- So, what are the Best 3 Ton Floor Jacks?
Top 5 Best 3 Ton Floor Jacks On The Market Reviews
1 Arcan 3-Ton Quick Rise Aluminum Floor Jack – Best Mid-Range 3 Ton Floor Jack
Arcan is a well-known designer and manufacturer of lifting equipment, and this 3-ton floor jack is a good example of what they produce. It actually has a very impressive look about it with its shiny silver appearance.
This isn’t a cosmetic gesture, though. This jack is built from aluminum that is graded aircraft-quality. That makes it durable and hard-wearing and able to survive at 40,000 feet. But it also makes it very lightweight and therefore easy to move around under a vehicle or when storing away after use.
It is fitted with a rubber-padded saddle and foam bumpers on the handle. This is to prevent any damage to the vehicle while in that raising or lowering process. It has a two-piece handle that gives you a good grip, but it also means that it can be stored away very easily.
The handle is side-mounted. This gives you good options for getting the position of the jack correct before the lift. The lift arm is reinforced to give it extra strength.
One of the excellent features of this jack is the dual pump system that is built-in. This is a design that will raise the saddle on the lift arm. It makes contact with the lifting point of the vehicle very quickly. And then the number of pumps needed on the arm to raise it to the necessary height is reduced to save effort and time.
How versatile is it?
It is designed with a low floor position and therefore goes under low vehicles; its minimum lifting height is just 3.75 inches. It will lift to a maximum of 18 inches. There are heavy-duty caster wheels on the leading edge and roller wheels at the back.
There are some good safety features built-in. One is the overload and bypass valves. These will stop you from lifting the jack beyond its capacity. It will also prevent any attempt at over-extension of the hydraulics. A powerful, well-made jack by a well-respected company, It will be one of the contenders for one of the Best Floor Jacks.
- Made lightweight from aircraft quality aluminum.
- It has a powerful lift and some good safety features.
- Not the cheapest you will find.
2 Blackhawk B6350 Fast Lift Service Jack – 3.5 Ton Capacity – Best Budget 3 Ton Floor Jack
This is a well-built jack that is marketed by the Blackhawk company. As far as we can determine, they do not make this jack themselves but source it and then sell it on. This particular item is made in China. There is a sticker on some jacks that says made in the US. Perhaps that is talking about the sticker and not the jack.
Nevertheless, it has a decent build quality and has a lift capacity of 3.5 tons or 7000 pounds. It is made of steel and has a very strong universal joint that handles the precise control over the load.
But before we continue, you should know…
It is not particularly low to the ground in its design. You will, therefore, have to check to make sure it will actually go under your vehicle. At its lowest point, this jack is 5 and a half inches off the floor. The actual lifting range is 5.6 inches to 22 inches.
It has a good safety feature built-in using a bypass and a safety valve. That’s not unique to this jack, of course, but it is an added safety feature. It will come into operation if the load you are trying to lift is greater than its maximum capacity of 7000 pounds. Either that or when the jack reaches its maximum operating height.
Quick as a flash…
The design opens the pressure overload valve. This causes the fluid to be bypassed, ensuring there are no problems caused by the pump unit. This jack weighs 85 pounds, so it is no lightweight. To assist with positioning the jack under the vehicle, the saddle swivels, which makes life a little easier.
It also features a fast lift feature that takes you to the jacking point quickly before you start to lift the load.
The saddle is four inches wide. And when you want to store it away after use, there is a bolt that needs to be loosened to remove the handle.
The bottom line…
This is a decent floor jack for use at home. We would like to reiterate at this stage that it is necessary to use proper jack stands to support the vehicle once it is lifted. It is not a good idea to just rely on the strength of the jack to hold the vehicle while work is carried out. It is set at a very competitive price point for those on a budget.
- Well-made with a strong build.
- Some good safety features at a very attractive price point.
- Doesn’t go particularly low to the ground, so it may not go under some vehicles.
3 Neiko Pro 20272B Premium Low Profile Aluminum Floor Jack – Best Value for the Money 3 Ton Floor Jack
This is a popular floor jack that is used by not only people at home but by professional mechanics. It is popular for a number of reasons, but one is that it only weighs 56.9 pounds. That means it can be picked up and put in the trunk of your car quite easily if needed.
The reason it’s so light is the aluminum build despite what is a standard size of 29.1 by 13 by 6.7 inches. Another big advantage of this floor jack is its lift range. There are some jacks that do not hug the ground and therefore, can not work with low-profile vehicles. No such problems with this floor jack.
Why are we so sure?
It has a lift range from 3.75 inches to 19.25 inches. That means it is going to go under just about anything that isn’t lying on the floor. If you have a low-profile vehicle, then this is a floor jack to look at. That potential for a low lift range and some good features make this jack stand out. It means it is going to ensure it will be considered as one of the Best Floor Jacks.
A good safety feature that has been included in the raised dots on the saddle. This means that it is less likely to slip whilst on the jack. It has rollers and wheels at each corner. Wheels are at the back and caster type rollers at the front. These will swivel to allow you to get the angles right for securing the saddle. Another design feature that makes this floor jack easy to move around.
The protection you need…
As is standard on most jacks, there is an overload protection design with a safety valve. This prevents you from lifting too much weight or exceeding the maximum height. It is a very good feature for those who might be new to using jacks.
Is there a downside? Only that it’s not particularly cheap. But it is very good.
- Durable and tough but lightweight build.
- Very good lift range and some good safety features.
- Some might find it expensive.
4 NOS NSJ0301 3-Ton Aluminum Service Jack – Best Premium 3 Ton Floor Jack
This is a floor jack with a difference. It has many of the good features it needs, as we shall see. But it carries something else. NOS has designed this to look rather smart, and so it does. Giving it a certain style just adds a little extra to what could be considered a mundane visual object. It is not just a good booking jack, though, and as we said, it comes with many good features.
What kind of features?
Features that will make it a contender for one of the Best Floor Jacks. The build quality is very high, and it is made from aluminum. By now, we know that aluminum means it will be quite lightweight when compared to many of its competitors. It measures 28.7 by 13 by 6.6 inches and weighs just 54 pounds, so it is suitable to be carried around in your vehicle if necessary.
But despite its lightweight design, it is still tough enough to do the job. It has a lift range of 3.75 inches to 18.125 inches. That means it is going to work with low-profile vehicles. But you will need to give some consideration to its maximum height of 18.12 inches. That is not particularly high for a jack of this kind.
What about safety?
It has some good safety features with a reinforced arm for lifting. This means when lifting its 3-ton maximum, it is well within its working limits. It is also fitted with a very standard safety valve. This will prevent you from attempting to lift over its recommended weight limit. This is always an excellent addition for newcomers to the use of a floor jack.
It has a padded two-piece handle and also a padded saddle to prevent any accidental damage to the vehicle. There are wheels on the back of the jack and tough metal rotating caster type wheels on the front. This allows you to get a good position through small adjustments for the lift.
A good option, but not cheap…
Even though this jack has one or two limitations, especially in its lift height, we still feel it a good option. It is though quite expensive.
- The arm is reinforced for heavy lifting, and the arm and saddle have padding.
- Made from aluminum, makes it lightweight and easy to move around.
- Quite expensive.
5 Liftmaster 3 Ton Aluminum and Steel Low Profile High Lift Floor Jack – Best 3 Ton Low Profile Floor Jack
This floor jack from Liftmaster is another product with an aluminum build. You could argue that aluminum is not as strong as steel, and you would be right. Even allowing for some deterioration and corrosion, steel is still tougher than aluminum. Steel will not bend or warp through force and can withstand great heat.
You might think that it, therefore, is an ideal material for a floor jack where strength is vital. You would be right again. However, the downside is the weight of steel. This makes it cumbersome and hard to move around and, of course, very heavy. Aluminum is tough enough. This floor jack is a good example weighing less than sixty pounds.
But is it safe?
It has a lift capacity of three tons and is fitted with the standard safety valve. This is to make sure you don’t try to lift the vehicle too high. And also that you don’t lift more than the agreed weight limits for the jack. It has a very good dual pump lifting design. This hydraulic system takes much less effort than a normal lift. This is because the whole process is quicker and less strenuous.
What’s our verdict?
It has a good lift range with its lowest point at just 2.95 inches. This means it will be able to work with very low profile cars. Its maximum lift height is 19.68 inches. For ease of storing away after use, it has a two-piece handle. The saddle is given a patterned rubber surface to ensure it makes good secure contact with the vehicle.
It has rugged wheels at the saddle end and metal rotating caster type wheels at the other. This allows you to move into a suitable position easily. It is set at a very attractive price point, but it is considered unreliable by some users.
- Well made with a good lift range.
- Lightweight aluminum build at a cost-effective price.
- Some are not convinced about its stability and durability.
Best 3 Ton Floor Jacks Buying Guide
Just one or two things to think about before buying.
How many vehicles do you have to lift?
If they vary in size, you might need to check the weight of the largest. All of these floor jacks have a weight limit of 3 tons. That is ok for most small to medium cars. Heavy pickups may exceed that, and the jack will not function safely, if at all, with them.
The nature of its work says it needs to be strong. Steel is the strongest, but also the heaviest. A good quality aluminum is fine. Both are good because they resist corrosion and rust.
You do need to pay attention to this, especially if you have a low profile car. Some jacks will not go under the car if the cars are too low. But you must also consider its upper limit. If it doesn’t go high enough, that can also cause problems.
Always ensure that the jack is well-placed and buy a jack with a safety valve. This will stop you from lifting something that is too heavy. It will also prevent you from exceeding a safe height for the lift. Finally, never rely on the jack to support the weight of the vehicle. You will need some approved ramps to hold it securely.
There are some other issues like lift speed, but the main ones are listed above.
Looking for more superb jack options?
If so, check out our reviews of the Best Low Profile Floor Jack, the Best High Lift Floor Jacks For Trucks SUVs, our Best Bottle Jacks Reviews, the Best Floor Jacks Made In The USA, and the Best Aluminum Floor Jacks you can buy in 2020.
So, what are the Best 3 Ton Floor Jacks?
We will need a low-profile jack for the car. We also want it to have good safety features and to be made of lightweight aluminum. Therefore, we would choose the…
It features a reinforced padded arm for heavy lifting, and the saddle is also padded for protection. Plus, its aluminum construction makes it lightweight and easy to move around. All in all, an excellent jack and a worthy winner of our Best 3 Ton Floor Jacks review.
Happy car maintenance.